beper 90.820 Electric Hot Plate Instruction Manual
- June 4, 2024
- beper
Table of Contents
beper 90.820 Electric Hot Plate Instruction Manual
Precautions
Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable. The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label. The appliance can be damaged if the voltage is not correct. If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
This appliance is for household use only. To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids. Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.
Use advice
Never leave oil and fat to be heated without supervision.
Do not touch the surface of the plate when the appliance is in use or getting
hot.
The plate has been manufactured only for heating or cooking food.
It is recommended to use the plate when the fry pan is already placed on it.
Do not use the appliance in open space/outdoors.
Pans to use
For the most efficient use of your hot plate, the cooking utensils used should be with a solid base and be as even as possible, with a diameter of about 18mm to 20mm, and a maximum quantity of 12 L. How to use the hot plate When using the hot plate for the first time, connect the plug to the socket and turn the temperature knob to the highest temperature setting for 3-5 minutes to remove dust that may have accumulated during manufacturing or storage
Turn the hot plate on by rotating the temperature knob clockwise. When the light indicator turns on, the hot plate starts heating.
There are 5 cooking levels as follows:
- For slow cooking, delicate foods, or thickening sauces, etc.
- For simmering food in big quantities
- For meat stir-frying
- For high temperature cooking
- For boiling
The light indicator turns off automatically when the hot plate reaches the selected temperature. A built-in temperature control device helps maintaining the desired temperature. Do not use the appliance continuously for more than one hour. When the appliance is not in use, set the knob at the lowest level (0) and disconnect it from the electric socket. Leave the appliance cooling down before storing.
Cleaning
Turn off the appliance and disconnect from the socket. Then clean with a lightly damp cloth or with a non abrasive detergent.
Specifications
- Power: 1500 W
- Power supply: 220-240V ~ 50/60 Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge. In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product
Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will
forward your enquiries to your distributor.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>