WATTS BB-M101 Smart Volumetric Flow Monitor User Guide
- June 4, 2024
- WATTS
Table of Contents
WATTS BB-M101 Smart Volumetric Flow Monitor
Z64-CC3100MODR1 Meets Class B: ICES & FCC Part 15
BB-M101 is certified by IAPMO R&T to NSF/ANSI 42 and 53, for the reduction of claims verified and substantiated by test data as specified on the performance data sheet when used in BB-S100 and BB-S101 systems. BB-M101 is also certified to CSA B483.1, and NSF/ANSI 372 for Lead Free compliance when used in BB-S100 and BB-S101 systems.
Stay Connected, Stay Protected
- Track your system’s filter life
- Get notified when it is time to replace your system’s filter
WARNING
This Quick Start Guide is not a substitute for the Installation Manual. Please
refer to the Installation Manual for proper installation. The installation
manual can also be accessed using the QR code. Watts® is not responsible for
the failure of alerts due to connectivity or power issues. Do not let system
freeze.
INSTALLATION
- Install the BB-M101 Kit per the installation manual provided with the filtration system.
- Plug the monitor into 120V supply & follow the set-up wizard to connect BB-M101 to your 2.4GHz Wi-Fi Network. Ensure that the installation location has strong Wi-Fi signal.
- Follow the set-up wizard to register your BB-M101. Steps 2 & 3 are highly recommended and required so you can receive text and email notifications. The flow monitor can still function if you skip these steps, but the alerts / notifications will be localized or limited on the device only.
- Your monitor should now be all set and take you to the Home / Dashboard Screen. Below is a high-level overview of the Home / Dashboard screen.
How would I know if my device gets disconnected from my Home Wi-Fi?
The Wi-Fi Icon on the monitor will show a crossed line to indicate lost
connectivity. Notifications will also be sent on the registered email and
mobile number.
What notifications will I receive, and how do I select which notifications
to receive?
You should see / receive an alert to replace the filter when the Filter Life
Consumed reaches 100%. You can select additional notifications (email and / or
text message) by going to “Menu” g “Setting” g “Notifications” g “Email” or
“SMS” to get notified when the filter usage reaches 50% / 90% / 95% levels or
if the Wi-Fi gets disconnected for any reason.
- Water Pressure Temperature Maximum Flow Rate Volume To Alarm
- 0 psi to 125 psi (0 bar to 8.61 bar) 34° F to 125° F (1°C to 52°C) 26.5 GPM (100 LPM) 84480 Gal. (319,791 L)
Operating conditions above are for the BB-M101 monitor alone. See document IOM-WQ-BB-S101 for the complete system operating conditions.
Watts Regulator Co. 815 Chestnut Street North Andover, MA 01845-6098
- USA : T: 978-689-6066 F: 978-975-8350 Watts.com
- Canada : T: 888-208-8927 F: 905-481-2316 Watts.ca
- Latin America : T: (52) 55-4122-0138 Watts.com
QG-WQ-BBM101 2201 EDP# 68110471 © 2022 Watts
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>