beper P204CAL200 Continuou Cycle Steam Station User Manual
- June 3, 2024
- beper
Table of Contents
beper P204CAL200 Continuous Cycle Steam Station
Precautions
Read the following instructions carefully, since they give you useful safety
information about installation, use and maintenan-ce and help you avoid
mishaps and possible accidents. Remove the packing and make sure that the
appliance is intact, with special attention to the supply cable. The elements
of the packing (plastic bags, polystyrene, etc) do not have to be accessible
to the children, in order to preserve them from danger sources. It is
recommended not to throw these packing ma-terial in the domestic waste, but to
deliver them to the appropriate station of collection or destruction refusals,
asking eventually infor-mation to the manager of the Sanitation Department of
your own mu-nicipality. If the supply cord is damaged, it must be replaced by
the manufac-turer, its service agent or similarly qualified persons in order
to avoid a hazard. Before connecting the appliance make sure that the mains
voltage corresponds to the data specified on the label. The appliance can be
damaged if the voltage is not correct. If the plug does not suit the socket,
let it be replaced with another suitable plug by qualified personnel only,
which shall also ensure that the section of the socket cables is suitable for
your appliance power absorption. Generally, the use adaptors multiple plugs
and/or extensions is not recommended; should they be necessary, please use
only simple or multiple adaptors and extensions in compliance with the safety
rules in force, making sure that the capacity absorption limit marked on the
simple adaptors and the extensions and the maximum power limit marked on the
multiple adaptor are not exceeded. Do not use the appliance if the cable or
the plug shows any damages. Do not use the appliance after a possible
irregular working. In this case, switch it off and do not break it open. Refer
to an authorized Beper after-sale service for repair and require original
spare parts only. Failing to follow these instructions may impair the safety
of your appliance. This appliance is to be destined to its special purpose
only. Any other use is to be considered as improper and thus dangerous. The
manu-facturer cannot be responsible for any damages deriving from impro-per,
wrong or incautious use. This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of
the appliance into water or other fluids. Do not use the appliance near
explosives, highly flammable mate-rials, gases or burning flames. Do not allow
children, disabled people or every people without experience or technical
ability to use the appliance if they are not properly watched over. Close
supervision is necessary when any appliance used by or near children.
Use advice
Make sure that the mains voltage corresponds to the data specified on the
rating label. If the cord supply or plug are damage, or in case of electric
shock, do not use the iron but make it repaired by an authorized assistance
centre. When using the iron for the first time remove the protection from the
soleplate, if necessary use a soft cloth. Pay attention to do not scratch the
soleplate with metallic object, as well as zip, buttons, etc. When use the
iron for the first time the soleplate may diffuse a light smoke caused by
evaporation of protective oil used in factory; that is not dangerous and smoke
will disappear after some use. The power cable must always be free from knots
or tangles. Never pull the supply cord to unplug the appliance. Do not roll up
the electric cord around the iron. Keep away to a reasonable distance the
supply cord from the iron plate, especially when it is hot. When making a
break or if not used, put the iron in vertical position. The plate of the iron
becomes very hot so take care not to burn yourself. Always choose the most
suitable temperature for the cloth to iron. Do not use the iron as a heater.
Do not subject the iron to shocks. Before cleaning, always unplug the power
cord. If you decide not to use the product any longer, you must place it away
from children and in order not to create any danger.
Description of the product Fig. A
- Handle
- Continuous steam button
- Temperature light
- Ceramic soleplate
- Thermostat
- Lock lever
- Tank
- Water tank level indicator
- Cable reel
- Anticalcium cartridge
Iron lock
The iron lock button at the base is necessary to store it safely once ironing
is finished.
To fix the iron, hook it in a vertical position on the appropriate seat above
the tank and move the lever downwards. To unlock the iron, move the lever in
the opposite direction.
First use
Remove any stickers, foil or packaging from the soleplate. Remove the
anticalcium cartridge from under the base by simply pulling it and immerse it
for 5-10 minutes in water. Put it back into the product base before ironing.
Any strange smells or small slags coming from the unit during the first use
are normal.
Ironing
Warning: iron only on heat-resistant surfaces and surfaces that allow
steam passage.
Note: the iron is designed to use tap water, however, if the water is
very hard, it is advisable to use a mixture of distilled water and tap water.
Do not use perfumed, alcohol-based water or detergents.
Dry ironing
Place the iron on the tank in an upright position. Connect the plug to the
socket and turn the thermostat to the desired temperature to turn the iron on.
The light will turn on and when the temperature is reached it will turn off.
At this point you can proceed with ironing.
Warning: never touch the soleplate of the iron until it has completely
cooled down.
Steam ironing
Pour the water into the tank without ever exceeding the level indicated by the
word MAX, the maximum capacity is 1.2L. Place the iron on the tank in an
upright position. Connect the plug to the socket and turn the thermostat to
the desired temperature to turn the iron on. The light will turn on and when
the temperature is reached it will turn off. To activate the steam, turn the
thermostat to temperatures ●● or ●●● and press the continuous steam button.
More high is the temperature, more steam will come out. Respect an interval of
5 seconds between one shot of steam and the next. If there is no more water in
the tank before finishing ironing, it can be added at any time. Always make
sure, before using the iron, that the temperature of the iron is correct for
the type of fabric: wool with wool, cotton with cotton, etc. The iron is quick
to heat up and slow to cool down; then start ironing garments that require low
temperatures (such as synthetic fabrics) and in progress iron clothes which
needs higher temperatures. When the garment to be ironed consists of several
fabrics, adjust the temperature for the most delicate fabric. If you do not
know the type of fabric to be ironed, it is recommended to iron a part of it,
normally not visible when the garment is worn, starting from the minimum
temperature, and then finding the most suitable temperature. It may happen
that the garment becomes shiny, in this case finish to ironing in order to not
damage it and iron the fabric from the reverse side. After use turn the
thermostat to the minimum temperature to turn off the product and disconnect
the plug. Always empty the tank after use and let the soleplate cool down. To
empty the tank, remove the anticalcium cartridge
Attention: pay close attention to the symbol: the fabric cannot be
ironed.
Warning: never touch the soleplate of the iron until it has completely
cooled down. N
Vertical ironing
Set the thermostat on temperatures ●●● or ●●● and once the temperature
reaching light has turned off, hold the iron in a vertical position about 20
cm from the fabric to be ironed and press the continuous steam button.
Cleaning
- Remove the plug from the socket.
- To remove encrustations or starch residues from the soleplate, use a damp cloth or a non-abrasive detergent when the soleplate is still hot. For stubborn stains, there are special detergents. Always dry the soleplate after each cleaning.
- Clean the body of the iron with a damp cloth without detergents. Do not use metal wool pads or abrasive deter-gents.
- Anti-calcium cartridge replacement
- The filter must be replaced every 6/12 months based on the hardness of the water used
Technical data
Power: 2000-2250W
Power supply: 220-240V~ 50-60Hz
For any improvement reasons, Beper reserves the right to modify or improve the
product without any notice.ever direct the jet of steam near people and / or
animals
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original
purchase a 24 month guarantee ap-plies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the applian-ce’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
- Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.
- For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
- In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product
- Contact your distributor in your country or after sales department Beper.
- E-mailassistenza@beper.com which will forward your enquiries to your distributor.
- BEER SRL
- Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona Tel. 045/7134674 – Fax 045/6984019
- beper.com
- CUSTOMER CARE BEPER
Documents / Resources
|
beper P204CAL200 Continuou Cycle Steam
Station
[pdf] User Manual
P204CAL200 Continuou Cycle Steam Station, P204CAL200, Continuou Cycle Steam
Station, Continuou Cycle Station, Cycle Station, Steam Station, Continuou
Station, P204CAL200 Station, Station
---|---