beper P102CON001 Vacuum Sealer User Manual

: October 30, 2023
: beper

Table of Contents

Vacuum Sealer Use Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

beper P102CON001 Vacuum Sealer

Vacuum Sealer Use Instructions

Precautions

Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents. Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after- sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use. Vacuum Sealer Use Inst
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children

General safety advice

The vacuum sealer is for indoor use only. Do not use the product outdoor. Be sure that the product is dry before any use. Unplug the device when not in use.
Do not touch the heat sealing strip during or immediately after us

Product description Fig. A

Vacuum sealing button
Sealing button
External vacuum tube port
Air release valve
Unlock buttons
Stop line
Heat sealing strip
Vacuum chamber
External vacuum tube

Instruction for use

Vacuum and sealing

Put the bag with the open side inside the vacuum chamber (Fig. B). Close the lid, you should hear a click on each side of the product. Press twice consecutively the vacuum sealing button (VAC SEAL) (Fig. C), a blue LED turns on and the vacuum starts. When the blue LED turns off, it means that vacuum and sealing are finished, so lightly pull the air release valve and push the unlock buttons to set free the bag (Fig. D).

To seal a bag without vacuum, put the bag inside the vacuum chamber, close the lid until you hear two clicks and press twice consecutively the sealing button (SEAL). A blue LED turns on and after a few seconds some air is vacuumed in order to let seal the bag. When the blue LED turns off sealing is over, so lightly pull the air release valve and push the unlock buttons. To stop vacuum and sealing functions, press for once vacuum sealing or sealing buttons in any time. The bag width must not exceed 30 cm otherwise it cannot be welded correctly. Use only nylon-PE films with a structure (points or grooves) on one side and a thickness of approximately 0.15-0.30 mm. Otherwise the weld seam will not be tight and the appliance may be damaged. The quality of the weld seam will vary depending on the type and thickness of the bag. To make external vacuum, connect the tube to the canister (not included) and to closed vacuum sealer machine by the external vacuum tube port (Fig. E). Press twice consecutively the vacuum sealing button (VAC SEAL) (Fig. F). A blue LED turns on and the vacuum starts. When the blue LED turns off the vacuum process is over.

Unplug the cable after each use and do not close the lid, leave it slightly raised without hearing closing clicks.

Technical data

Power: 85W
Voltage: 220-240V~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance.
For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that.

The appliance has been used properly and for the purpose for which it has been intended.
The appliance has not been tampered with, otherwise it is not maintainable.
The purchase receipt shall be presented.
The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product Contact your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward your enquiries to your distributor.