beper 90.590Y Popcorn Machine User Guide
- October 27, 2023
- beper
Table of Contents
90.590Y Popcorn Machine
User Guide
For further information and/or for instructions for use in other languages , please visit: beper.com
Precautions
Read the following instructions carefully, since they give you useful safety
information about installation, use and maintenance and help you avoid mishaps
and possible accidents. Remove the packing and make sure that the appliance is
intact, with special attention to the supply cable. The elements of the
packing (plastic bags, polystyrene, etc.) do not have to be accessible to the
children, in order to preserve them from danger sources.
It is recommended not to throw these packing material in the domestic waste,
but to deliver them to the appropriate station of collection or destruction
refusals, asking eventually information to the manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label.
The appliance can be damaged if the voltage is not correct. If the plug does
not suit the socket, let it be replaced with another suitable plug by
qualified personnel only, which shall also ensure that the section of the
socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not
recommended; should they be necessary, please use only simple or multiple
adaptors and extensions in compliance with the safety rules in force, making
sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not
exceeded. Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case,
switch it off and do not break it open. Refer to an authorized Beeper after-
sale service for repair and require original spare parts only. Failing to
follow these instructions may impair the safety of your appliance. This
appliance is to be destined to its special.
Some warnings
Check that the mains voltage corresponds to the data specified on the label of
the cord supply.
Place the popcorn maker on a flat and stable surface, away from heat and cold
sources.
Do not touch the popcorn maker when working, because risks of injuries, burns.
Do not touch the moving parts.
When working, be careful of the steam that can go out from the cover on the
top of the popcorn maker.
Attention: hot surfaces ; do not touch when working.
Do not use the popcorn maker when empty.
After using the popcorn maker, turn it off and unplug from the socket.
Do not let the popcorn maker without supervision when plugged on the socket.
Do not let the cord supply plugged on the socket, if you do not use the
popcorn maker.
Do not pull on the cord supply to unplug from the socket.
If the cord supply is damaged, make it replaced by the authorized assistance
centre.
Do not immerge the popcorn maker unit and cord supply into water or other
liquids.
Do not expose the popcorn maker to damp and do not use it outdoors.
If liquids enter into the popcorn maker, unplug immediately from the socket
and make the popcorn maker repaired by a qualified person.
Do not touch the popcorn maker and cord supply with wet hands.
Description Fig. A
- Measuring lid
- Lid/container
- Heat outlet opening
- Pouring lid
- Aluminum ring for cooking
- Motor unit
- Switch ON/OFF
- Non-skid feet
- Cord supply
Instruction’s
First use
When using for the first time wash the measuring lid (1), the lid/container
(2) with water and dry all. Clean the aluminum ring (5) with a wet cloth and
dry. Do not immerge the motor unit (6) into water.
How to use it
Place the popcorn maker on a flat and table surface.
Pour the corn using the measuring lid (1), onto the aluminum ring (5). Do not
pour too much corn (always refer to the quantity indicated on the measuring
lid (1). When making popcorn, do not add oil or butter. Any type of seasoning
such as salt, sugar, chocolate or caramel should only be added at the end when
the popcorn has come out of the machine.
Plug the cord supply (9) to the socket. Turn on the popcorn maker with the
switch (7) on.
Preparation time least around 3-4 minutes, depends of the corn quantity into
the popcorn maker.
Do not turn on the popcorn maker before filling it with the corn.
Place a container under the pouring lid (4), close to the motor unit(6).
The popcorn must go out easily from the pouring lid (4).
Salt and serve.
For next use, let the popcorn maker cool for 15 – 20 minutes.
Cleaning and care of the popcorn maker
Make sure the popcorn maker is turned off, the switch (7) on off and the cord
supply (9) unplugged from the socket.
Wait for the aluminum ring(5) and motor unit (6) getting cooler.
Clean the lid/container (2) with hot water and detergent.
Clean the aluminum ring (5) with a damp cloth and hot water and dry. Do not
use abrasive sponge or detergent.
Clean the motor unit (6) with a damp soft cloth. Do not immerse the popcorn
maker into water.
Do not spray detergents directly on the popcorn unit.
Technical data
Power 1200W
Power supply: 220-240V~ 50/60Hz
For any improvement reasons, Beeper reserves the right to modify or improve
the product without any notice
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be disposed
of in the normal unsorted municipal waste stream. Old appliances must be
collected separately in order to optimize the recovery and recycling of the
materials they contain, and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee. The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beeper reserves the
right to replace only the very part in question and not the entire product.
Contact your distributor in your country or after sales department Beeper.
E-mail assistenza@beper.com which will
forward your enquiries to your distributor.
YOU MIGHT ALSO LIKE
Hotdog Machine
Cod.: P101CUD501
It cooks pizza perfectly in less than 5 minutes 31 cm ceramic refractory plate
Cool touch handles to remove the plate 5 cooking levels with adjustable
thermostat
Cooking temperature up to 400 ° C 15 minute timer with acoustic signal
Metal body, stainless steel heating elements 1200W
beper.com
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
beper.com CUSTOMER CARE
BEPERhttp://customercare.beper.com/support/home