beper P101TOS002 Panini Maker Instruction Manual
- June 3, 2024
- beper
Table of Contents
beper P101TOS002 Panini Maker
Precautions
Read the following instructions carefully, since they give you useful
safety information about installation, use and maintenance and help you avoid
mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special
attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be
accessible to the children, in order to preserve them from danger sources. It
is recommended not to throw these packing material in the domestic waste, but
to deliver them to the appropriate station of collection or destruction
refusals, asking eventually information to the manager of the Sanitation
Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds
to the data specified on the label.
The appliance can be damaged if the voltage is not correct. If the plug does
not suit the socket, let it be replaced with another suitable plug by
qualified personnel only, which shall also ensure that the section of the
socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not
recommended; should they be necessary, please use only simple or multiple
adaptors and extensions in compliance with the safety rules in force, making
sure that the capacity absorption limit marked on the simple adaptors and the
extensions and the maximum power limit marked on the multiple adaptor are not
exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case,
switch it off and do not break it open. Refer to an authorized Beper after-
sale service for repair and require original spare parts only. Failing to
follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is
to be considered as improper and thus dangerous. The manufacturer cannot be
responsible for any damages deriving from improper, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of
the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or
burning flames.
Do not allow children, disabled people or every people without experience or
technical ability to use the appliance if they are not properly watched over.
Close supervision is necessary when any appliance used by or near children.
General description Fig. A
- Temperature reaching light
- Insulating handle
- Closing hook
- Power Cable
- Top Plate
- Bottom plate
Use instructions
Before the first use, we advise you to clean the baking plates with a soft
damp cloth or sponge. Lightly grease the plates with butter or cooking oil;
the toaster can release some smokes and odours, open the toaster and allow it
to heat for at least 5 minutes without food. It is recommended to open the
windows to eliminate smoke and odours due to the heating of the internal
components.
Place the toaster on a flat, smooth and heat-resistant surface.
Insert the plug into an electrical outlet. Check that the power cable is not
in contact with hot parts.
Operation
Insert the plug in the power socket, the pilot light will come on to indicate
that the appliance is switched on.
The appliance starts to preheat; when the cooking temperature is reached, then
the ready light will turns off and the sandwich maker is ready for use.
Place the sandwich on the bottom plate and close the toaster plates, pressing
slightly until the hook closes. If you want to raise the height of the toaster
plates, simply turn the closing hook and rest the top plate.
Be careful not to touch the hot parts of the toaster.
The sandwich is cooked in about 2-3 minutes .
Check the right cooking by adjusting according to your tastes.
After cooking, remove the sandwich from the plate using a wooden or plastic
spatula (not supplied) if necessary.
During this operation, be very careful not to touch the hot parts of the
toaster.
Do not use metal spatulas or knives as they could damage the plate coating.
After cooking the sandwich, disconnect the plug from the electrical socket.
If necessary, to move the toaster use only the insulating handle, the parts of
the toaster could be very hot.
Some tips
Preheat the plates before use by inserting the plug into the electrical outlet
before starting the preparation of the sandwich.
For sandwiches with creamy and soft fillings use medium thickness bread. To
obtain more browning effect of the toast, a light layer of butter can be
spread on the sides of the bread in contact with the plates.
Toaster cleaning and maintenance Before carrying out any cleaning or
maintenance operation, disconnect the appliance from the power supply by
disconnecting the plug and waiting for the appliance to cool down completely.
Clean the plates and the outside with a damp cloth.
Avoid using sharp metal tools or abrasive products as they could damage the
coating of the plates.
Never immerse the toaster in water.
The toaster can also be stored in an upright position, if completely cold and
not in use
Technical data
Power:
850W
Power supply:
220-240V ~ 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of purchase
(fiscal receipt) indicating the date of purchase and the model of the
appliance.
For any technical assistance, please contact directly the seller or our head
office in order to preserve the appliance’s efficiency and NOT TO void the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing a fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or having visible signs
of use in consumable products (such as lamps, batteries, heating elements…)
the aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beper reserves the right
to replace only the very part in question and not the entire product Contact
your distributor in your country or after sales department Beper.
E-mail assistenza@beper.com which will forward
your enquiries to your distributor.
BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019
www.beper.com
Documents / Resources
|
beper P101TOS002 Panini
Maker
[pdf] Instruction Manual
P101TOS002 Panini Maker, P101TOS002, Panini Maker, Maker
---|---