SLV 1007592 Wall and Ceiling Light Instruction Manual
- June 17, 2024
- SLV
Table of Contents
SLV 1007592 Wall and Ceiling Light
Product Specifications
- Model: 1007590 …91, 1007592 …93
- Input Voltage: 200V-240V ~50/60Hz
- Light Source: LED
- Socket Type: E27
- Maximum Wattage: 15W
- Weight: 1.33 kg (1007590 …91), 1.11 kg (1007592 …93)
Product Usage Instructions
Safety Instructions:
- The installation should be done by an approved electrician following local and national regulations.
- Do not alter, modify, fasten anything on, or cover the product. Take out of service if there is a defect or malfunction.
- Ensure children are not harmed by the product.
- Operate only on a firm, even surface, with LED lamps, in dry indoor areas, and avoid mechanical strain or dirt contamination.
Lamp Replacement
Disconnect the luminaire from the mains and let it cool down before
replacing the lamp. Use suitable light sources: LED, E27, maximum 15W.
Care and Storage:
Disconnect the product from the mains before cleaning. Clean external surfaces regularly with a slightly moistened cloth. Store in a dry and clean place.
Installation:
Switch off the mains before installation. Use only described accessories and suitable fastening materials. Install on wall or ceiling surfaces as shown in the figure provided.
Electrical Connection
Equip flexible wire ends with suitable wire ferrules. Check for secure fixation and proper function after connection.
Frequently Asked Questions
Q: Can I use a higher wattage bulb than recommended?
A: No, it is recommended to use a maximum 15W LED bulb to prevent damage to the product.
Q: Is this product suitable for outdoor use?
A: No, this product is designed for dry indoor areas only.
Q: How often should I clean the product?
A: It is recommended to clean the external surfaces regularly with a slightly moistened cloth.
INSTRUCTION MANUAL PART A
Wall- and Ceiling Light
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Operating Manual PART B
Wall- and Ceiling Light
1007590 …91 …82 …93
Read manual carefully and keep for further use!
- Safety advices for installation and operation.
- Disregard may lead to danger of life, burning or fire!
- Any works on the electrical connection only by electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children get not harmed by the product.
- Additional safety advices =
Use as directed
- Safety class I Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only with LED lamps.
- Operate only in dry indoor area.
- Do not strain mechanically or expose to strong dirt contamination.
Lamp replacement
Disconnect luminaire from mains and let it cool down. Suitable light sources:
LED, E27, 15W max.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for wall and ceiling surface mounting.
- Install as shown in the figure.
Electrical connection
- Equip flexible wire ends with suitable wire ferrules!
- Live conductor -> Terminal L
- Neutral conductor ->Terminal N
- Protective conductor ->Earth terminal
- Check secure fixation and proper function!
© 0001 26.06.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
UK CA
SLV UK
Unit E Chiltern Park Boscombe Road, Bedfordshire LU5 4LT