SMART WATCHES H6 Smart Watch Instructions
- June 6, 2024
- Smart Watches
Table of Contents
Instructions
Please read this manual carefully and keep standby before use
Packaging list
Watch Host x1 strap x1
Charger x1
Instructions x1
Product Overview
- power key
- function key
- TFT monitor
- strap card
- wristband
- sensor
- charging port
To be more accurate, wear the watch on the wrist to avoid the wrist bone; fit the skin but not too tight
Touch and button
Slide: Call out the control center
Slide up: Call out the notification center
lide right: call out function menu
Left slide: call out quick function
Long press: call out the dial switch
Power on: press for 3 seconds until the screen opens
Shutdown: 3 seconds, short press bright screen/off the screen
If the power button fails to turn on after 3 seconds, please try again after
charging
Connect the phone
Scan the code to download and install it
Download App: IOS System Phone Search at App Store Store
‘FitCouldPro’, Android phone can search for
‘FitCouldPro’ download installation in other app stores (such as app
treasure); or scan the code to download and install.
Pair it with a connected watch
- Keep your watch power above 20% before pairing to avoid pairing failure due to insufficient power
- In pairing and connection, make sure the phone Bluetooth is on and within a valid connection distance from the watch
- The equipment requires Android4.4 and above systems, IOS8.4 and above systems
Charging
Position the magnetic suction charging line at the metal touchpad of the charging port until the watch screen has a charging indication. A device is an all-in-one machine, and the rear housing and battery are not removable. Please also note the following items:
- Do not open or click the device’s rear shell.
- Do not remove, replace, and open the battery. Treatment of
- equipment and batteries must comply with local environmental protection laws.
- An adapter with a rated output voltage of 5V 1A/5V 2A is required.
- Keep the charging port clean and dry before charging to cause corrosion of metal contacts or other risks.
Profile of function
-
Disk Switch
Press on the main screen for 2 seconds, and enter the
dial switch interface, Slide left and right to switch to the elected dial and
click the selected dial -
Control Panel
Function overview:interference-free, setting, brightness adjustment, System information, called Bluetooth.
• Slide down on the home screen into the feature -
motion data
Displays the number of steps, distances, and calories
recorded on that day, The target can be set up at the App. -
motion mode
Sports mode options: walking, running, mountaineering,
cycling, Swimming, Yoga, Elliptical Machine; Click on the icon to start the
motion. -
motion record
The interface saves your most recent 10 motion
history, You can view the exercise length, heart rate, and calories during the
exercise Wait for data. -
heart rate
The App terminal opens the timing detection, which shows the heart rate data of the day; enter this interface to automatically measure the single heart rate value. -
sleep
This interface shows the sleep monitoring status of the day,
the data is updated every day, and the connection App can synchronously upload
and save the data. -
blood pressure
When entering the blood pressure measurement
interface, the bottom is green Start measurement in 30~60 seconds at this time
. The measurements are based on measurements using the PPG technique. -
blood oxygen
When entering the blood oxygen measurement interface,
the green light at the bottom began and was completed in 30~60 seconds, when
the measurement is based on the PPG technique. -
Call Bluetooth
Click on the Control Panel, and enter Call Bluetooth settings; use hands after being searched Bluetooth below the machine can use the call function. -
Calling records of the PRC
Up to 10 call records, up to date, The words
records will override the oldest records. -
A common contact person in the Chinese medicine
You can add, delete, and sort through App-Device-Common contacts, adding up to 10 common contacts. -
Permian dial number
After using the mobile phone to connect to the call Bluetooth, you can use the dial function normally. -
Permian music
Click the lower right button to choose the source of play (play built-in music or control mobile phone music); play built-in music can be uploaded to the music list page. -
Seasonal weather
After the watch is connected to the App and has location privileges on, this weather interface displays real-time weather temperature and weather type. -
Permian alarm clock
You can set a single alarm clock, cycle alarm
clock, and set up to 10 alarm clocks. -
Angiosec table
The interface is a stopwatch function and also sets segmented timing to save up to 10 data. -
PRC timer
In the timer function, the user can quickly start the
timing through the preset time of the system, or click the custom button to
make the time setting. -
Fact information
Open the push of relevant information on the
Append, the watch end can receive the corresponding message push, up to 15,
beyond the upper limit will be automatically covered forward. Enter the
feature by swiping up on the home screen -
Disable contact search mobile phone
If the watch and APP are connected, click Find the phone ring the phone and if the watch is not connected to the APP, the watch side is not connected. -
Permian setting
The setting function includes the screen display
(dial switch, bright screen length, brightness adjustment, wrist turning
bright screen length), language, vibration intensity, menu style, QR code, and
system settings.
Notification function
Drink water reminder
It can be turned on at the App[device> water reminder], which can set the
start, end time, and reminder interval.
sedentary reminder
It can be turned on in the App[device> sedentary reminder], open can set the start, end time, and no interference time.
Alarm alarm warning
Remind it after setting up and opening the alarm clock. Call remind You can answer or reject incoming calls.
Call remind
You can answer or reject incoming calls.
Note
- Do not remove, repair, or transform the products without authorization.
- Do not violently collide with the products to avoid product damage.
- Please avoid strong magnetic fields, direct light, or a high-temperature environment.
- This product is not used for disease diagnosis, treatment, and preventive purposes.
- This product is waterproof at IP67, to avoid prolonged immersion in water.
- Avoid wearing a tight strap and keep the watch clean in contact with the skin.
- Children should use the product under the guidance of their parents to do not to cause harm.
Performance parameters
Display screen: 1.32TF color screen, 360×360 pixel resolution
Waterproof grade: IP67
Sensor: 3-axis G-sensor
Battery Life: 5-7 days
Operating temperature: -10 °C ~ 50 °C
Battery type: lithium polymer battery
Battery capacity: 240mAh
Compatible systems: Android4.4 and above systems, IOS8.4 or above systems
Common problem processing
The watch cannot be turned on
- Please hold down the power button for more than 3 seconds.
- Please charge timely if the battery power is too low.
Bluetooth is not connected or is unable not connect
- Please try to restart the watch and reconnect.
- Please try to restart your phone with Bluetooth and connect again.
- Do not connect to other Bluetooth devices at the same time. The measure of heart-rate/blood pressure/blood oxygen is inaccurate
The measure of heart-rate/blood pressure/blood oxygen is inaccurate
- Generally, when measured, the sensor of the watch results in poor contact with the human body.
- Please pay attention to the full contact between the sensor and the wrist when measuring.
- Keep yourself still and keep your watch tight on your wrist when measuring.
- For people with darker skin tone and more arm hair, please add to the App[device>
In the strong measurement], open the enhanced measurement.
Sleep data are not accurate enough
- Sleep monitoring is a simulation of people’s natural sleep and get-up time state, which needs to be positive Often wear.
- Wear too late or when wearing, there may be errors.
- Sleep data is not monitored during the day, and the default sleep monitoring is 9:30 pm to the next day At 12:00 noon.
For more FAQ please check out App [for my> FAQ]
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.