AIGOSTAR 2H0000HO4 Self Power AC Wireless Doorbell Instruction Manual
- June 14, 2024
- aigostar
Table of Contents
SELF-POWER AC WIRELESS DOORBELL
Packing list
Appearance and function
Installation instructions
Receiver
-
Tear off the receiver protective film
-
Plug the receiver to the socket
Transmitter
-
Tear off the doorbell protective film
-
2. 1 Use sponge sticker for installation
2.2 Use screw to fix the bracket to
the wall and then put the transmitter to the bracket.
36 chord music for choice,
you can choose your favorite music as ringtone. The volume button includes
“low”,”medium” and “high” for adjustment
150-m remote control;
Insert the AC receiver into the applicable power socket; when the receiver
rings with a”ding dong” sound, the receiver enters the working state; very
little power consumption (less than 15W);
The transmitter does not need any battery;
The transmitter can be installed by using sponge sticker or screws.
Matching methods
Learning code matching: power on the receiver, long press”volume button” for 3
seconds, after hearing”ding-dong, ding-dong’ sounds, it enters into the
matching mode. Aim the transmitter needing for matching to the receiver, then
the receiver makes sound,”ding dong, ding dong”, which means successful
matching. If not receiving successfully or there is no signal of transmitter
within 5 seconds, it will exit the matching mode automatically.
Clear the learning code matching: in
the case of power failure of the receiver, long press the”volume button”, and
then plug in the power, loose hand after hearing’ ding dong, ding dong’ sound,
clear all the learning code matching of the machine; at this time, all
transmitters will fail and needs to be matched again.
Free matching, for example, one
transmitter for one receiver, one transmitter for multiple receivers, multiple
transmitters for one receiver or multiple transmitters for multiple receivers;
for multiple matches, please repeat the above online matching operation.
Matters needing attention
- DO NOT USE THE DOORBELL IN A HIGH TEMPERATURE ENVIRONMENT ABOVE 60°C
- WIRELESS DOORBELL SHALL NOT BE INSTALLED BESIDES THE TELEVISION, ELECTROMAGNETIC OVEN, MICROWAVE OVEN AND OTHER ELECTRIC APPLIANCES WITH ELECTROMAGNETIC WAVE. KEEP AWAY FROM THEM AS FAR AS POSSIBLE OTHERWISE THE ELECTROMAGNETIC WAVE WILL INTERFERE WITHTHE SIGNAL THAT THE DOORBELL RECEVES
- DO NOT INSTALL THE DOORBELL ABOVE THE RONDOOR WHICH ALSO HAS A MAGNETIC FIELD AND WILLALSO AFFECT THE RECEMING EFFECT OF THE DOORBBLL RECEVER
- THERECEIVER CAN BE FIXED BY SPONGE STICKER OR SCREWS PLEASE MAKE SURE THE TRANSMITTER S NOT CLOSE TO METAL MATERIAL AND IS AWAY FROM RAIN. (N CASE USE HAIR DRYER FOR DRYING)
https://www.aigostar.com/ES/turnto/turnto3.aspx
AIGOSTAR INTERNATIONAL LIMITED
UNIT 4 TEES VALLEY COURT GLENARM ROAD
WYNYARD TS22 5FE GB
GB311003583
http://WWW.AIGOSTAR.COM
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>