FSR HD-H1504K-SP HDMI Extender Set User Manual

June 10, 2024
FSR

HD-H1504K-SP
Extender Set

FSR HD H1504K SP HDMI Extender Set - User Manual
VER 1.0
244 Bergen Blvd Woodland Park, NJ 07424
973-998-2300 www.fsrinc.com

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating, or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended to protect and extend the life of your equipment.

Introduction

This 18Gbps HDMI Extender can extend high-definition video / audio signals, RS-232, and bi-directional IR to a distance up to 492ft / 150 meters between the transmitter and receiver via a single CAT cable. It supports resolution up to 4K2K@60Hz 4:4:4, 18Gbps, HDCP 2.2. One HDMI loop-through port is available for a local output. The extender receiver de-embeds the audio for analog L/R output. In addition, the extender is equipped with two-way IR pass-through which allows for source and display control.
This HDMI extender set includes two units: transmitter and receiver. The transmitter is responsible for capturing HDMI input signal and carrying the signal via one cost effective Cat5e/6 cable and transmitting / emitting IR control signals. The receiver is responsible for receiving the HDMI signal and transmitting / emitting IR control signals.
The extender offers the most convenient solution for HDMI extension via a single Cat5e/6 with long distance capability and is the perfect solution for any application.

Features

  • HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
  • Supports 18Gbps video bandwidth
  • The maximum extended transmission distance via a single Cat5e/6 cable:  394ft / 120 meters for 4K2K signal, 492ft / 150 meters for 1080P signal
  • Supports one HDMI loop output on the transmitter
  • Extracts audio to analog stereo output on receiver
  • With bi-directional IR, RS-232 and CEC pass-through
  • HDR, HDR10+, Dolby Vision and HLG function supported
  • Supports PoC (Power over Cable) function
  • Compact design for easy and flexible installation

Package Contents

Qty Item
1 18Gbps HDMI over HDBaseT Extender (Transmitter)
1 18Gbps HDMI over HDBaseT Extender (Receiver)
1 IR Blaster cable (1.5 meters)
1 20~60KHz IR Receiver cable (1.5 meters)
4 Mounting Ears
2 3-pin pluggable screw terminal connectors
1 24V/1A Locking Power adapter
1 User Manual

Specifications

Technical|
---|---
HDCP Compliance| HDCP 2.2 / HDCP 1.4
Video Bandwidth| 18Gbps
Video Resolution| 4K2K 50/60Hz 4:4:4
4K2K 50/60Hz 4:2:2
4K2K 50/60Hz 4:2:0
4K2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p, 480i
All HDMI 3D TV formats
All PC resolutions including 1920 x 1200
Color Space| RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth| 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr 4:2:2/4:2:0) 8-bit (4K60Hz 4:4:4 )
HDMI Audio Formats| LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats| PCM 2.0
ESD Protection| Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection

Transmitter| Inputs: lx HDMI Type A [19-pin female] Outputs: lx HDMI Type A [19-pin female] lx HDBT OUT [RJ45, 8-pin female] Control: lx IR IN [3.5mm Stereo Mini-jack] lx IR OUT [3.5mm Stereo Mini-jack]1x
RS-232 [Pluggable screw terminal] lx SERVICE [Mini-USB, Update port]
Receiver| Inputs: lx HDBT IN [RJ45, 8-pin female] Outputs: lx HDMI Type A [19-pin female] lx AUDIO OUT [3.5mm Stereo Mini jack] Control: lx IR IN [3.5mm Stereo Mini-jack] lx IR OUT [3.5mm Stereo Mini-jack]1x
RS-232 [Pluggable screw terminal] lx SERVICE [Mini-USB, Update port]
Mechanical
Housing| Metal Enclosure
Color| Black
!Dimensions| Transmitter / Receiver:
5.5″ A x 2.56″ [D] x 0.71″ [FI]
Weight| Transmitter: 160g, Receiver: 155g
Power Supply| Input: AC 100 – 240V 50/60Hz
Output: DC 24V/1A (Locking connector)
Power Consumption| 9.36 W
Operating Temperature| 32 -104°F / 0 – 40°C
Storage Temperature| -4 – 140°F / -20 – 60°C
Relative Humidity| 20 – 90% RH (no condensation)
Resolution / Distance
4K2K| 394ft / 120M
1080P| 492ft / 150M
Resolution/ Cable Length| 41(60 –
Feet / Meters| 4K30 –
Feet / Meters| 1080P60-
Feet / Meters
HDMI IN / OUT| 16ft / 5M| 32ft / 10M| 50ft / 15M
The use of Premium High-Speed HDMI” cable is highly recommended.

Operation Controls and Functions

5.1 Transmitter Panel

FSR HD H1504K SP HDMI Extender Set - Transmitter Panel

No. Name Function Description
1 Power LED Red LED indicates that the transmitter is powered on.
2 SERVICE port Firmware update port.
3 DC 24V DC 24V/1A power supply input port.

Note that the extender supports PoC function, it means that only 1 side, transmitter or receiver, needs to be powered by 24V/1A power adapter, the opposing side needs no power supply.
4| HDBT OUT| RJ45 connector for connecting the HDBT IN port of receiver with a CAT 5e/6 cable.
5| Connection
Signal
Indicator lamp| ▪ Illuminated: Transmitter and Receiver have a good connection.
▪ Flashing: Transmitter and Receiver have a poor connection.
▪ OFF: Transmitter and Receiver are not connected.
6|  Data Signal
Indicator lamp|  ▪ Illuminated: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ OFF: No HDMI signal.
7| HDMI OUT| HDMI loop output for local display.
8| HDMI IN| HDMI source input.
9| IR IN| IR input port for receiving the IR remote signal.
10| IR OUT| IR output port for control of source device. This IR output signal is from the IR IN port of receiver.
11| RS-232| 3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass-through from transmitter to receiver or from receiver to transmitter.

5.2 Receiver Panel

FSR HD H1504K SP HDMI Extender Set - Receiver Panel

No. Name Function Description
1 Power LED Red LED indicates that the receiver is powered on.
2 SERVICE port  Firmware update port.
3 DC 24V DC 24V/1A power supply input port.

Note that the extender supports PoC function, it means that only
1 side, transmitter or receiver, needs to be powered by 24V/1A power adapter, the opposing side needs no power supply.
4| HDBT IN| RJ45 connector for connecting the HDBT OUT port of transmitter with a CAT 5e/6 cable.
5| Connection Signal Indicator lamp| ▪ Illuminated: Transmitter and Receiver have a good   connection.
▪ Flashing: Transmitter and Receiver have a poor connection.
▪ Dark: Transmitter and Receiver are not connected.
6| Data Signal Indicator| ▪ Illuminated: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
7| HDMI OUT| HDMI output for display.
8| AUDIO OUT| 3.5mm stereo connector for analog audio output.
9| IR IN| IR input port for receiving the IR remote signal.
10| IR OUT| IR output port for control of display device. This IR output signal is from the IR IN port of transmitter.
11| RS-232| 3-pin Phoenix connector for RS-232 command transmission.
The RS-232 command will pass-through from transmitter to receiver or from receiver to transmitter.

5.3 IR Pin Definition
IR Receiver and Blaster pin’s definition is as below:

FSR HD H1504K SP HDMI Extender Set - IR Pin Definition

The following is an IR system diagram.

FSR HD H1504K SP HDMI Extender Set - diagram Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; when the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.

Application Example

FSR HD H1504K SP HDMI Extender Set - Application
Example

CONTACT INFORMATION:
FSR INC.
244 Bergen Blvd.
Woodland Park, NJ 07424
Phone: 973-998-2300
*Order Desk Fax: 973-785-4207
E-mail: sales@fsrinc.com
Web Site: http://www.fsrinc.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals