POLARIS WL70 7 Inch Digital Wireless System With Dvr User Manual
- July 4, 2024
- Polaris
Table of Contents
POLARIS WL70 7 Inch Digital Wireless System With Dvr User Manual
How to Pair Additional Cameras
Important: Make sure to power on the camera right after choosing “Pair” on the monitor. If the camera is already powered on before pairing, it won’t pair correctly.
You can install the camera and connect it to power, but when trying to pair, unplug the camera and plug it back in while it’s in pairing mode. It might be helpful to have two people – one for pairing on the monitor and another to unplug and plug the camera in while it pairs.
Pairing Mode:
- Press the AV button to choose the camera channel where you want the extra camera to show up.
- Press the MENU button and select MODE to enter pairing mode.
- Power up the camera right after entering pairing mode (or unplug and plug it in while the monitor is in pairing mode).
- The camera should pair.
- If it doesnt pair, repeat the steps and make sure you power up the camera after entering pairing mode.
MONITOR SPECS
- 7″ digital colour TFT LCD monitor with removeable sun visor
- Built in 2.4G digital wireless receiver module
- Operation freq: 2400-2483.5 MHz
- Format: NTSC
- Resolution: 1024 x 600 IPS
- Max SD storage: 128GB
- Operating temp: -20° to + 70°
- Voltage: 9-36V
CAMERA SPECS
- Sensor: CCD
- Built in 2.4G digital wireless transmitter module
- Resolution: 720P
- Angle: 120°
- Illumination: 0Lux (Built in IR) Waterproof: IP68
- Shock proof: 10G
- Voltage: 9-36V
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>