SLV 1007519 Pendant Light LED Base Instruction Manual
- June 17, 2024
- SLV
Table of Contents
SLV 1007519 Pendant Light LED Base
Parts
Features
220V-240V ~50/60Hz| 9,5W| 680 lm| 3000K| CRI >90|
Ø 3,5 x 10,7 cm| 0,56 kg
---|---|---|---|---|---|---
INSTRUCTION MANUAL PART A Pendant Light
| Ø 14 x 4,9 cm | Ø 15,2 x 17 cm | Ø 15 x 1,4 cm | Ø 15 x 1,5 cm |
|---|---|---|---|
| 1007521 | 1007530 | 1007533 | 1007542 |
| …22 | …31 | …34 | …43 |
| …23 | …32 | …35 | …44 |
| Ø 24 x 6,7 cm | Ø 22 x 2,8 cm | Ø 22 x 1,5 cm | |
| 1007524 | 1007536 | 1007545 | |
| …25 | …37 | …46 | |
| …26 | …38 | …47 | |
| 1007527 | 1007539 | ||
| …28 | …40 | ||
| …29 | …41 |
The installation requires expert
knowledge and may be carried out only by an approved electrician under
consideration of local and national regulations!
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Operating Manual PART B Pendant Light
1007518 …19 …20
Read manual carefully and keep for further use!
Safety advices for installation and operation. Disregard may lead to danger of
life, burning or fire!
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Safety class I (1) – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -20°C …+25°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class E.
Care / Storage
Disconnect product from mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ceiling surface mounting.
Install as shown in the figure.
Adapting the pendant cable (A) : Loosen strain relief(X). Push pendant
cable into canopy. Secure the strain relief.
Suitable Dimmer: Trailing-edge phase dimmer (Code C). Note manufacturers
instructions.
Electrical connection
Equip wires of the fixed wiring with protective tubes.
Equip flexible wire ends with suitable wire ferrules!
Live conductor ⇒ Terminal L
Neutral conductor ⇒ Terminal N
Protective conductor ⇒ Earth terminal
Check secure fixation and proper function!
Customer Support
SLV UK
Unit E Chiltern Parks
Boscombe Road, Bedfordshire LU5 4LT
© 0001 10.07.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>