Hukoro FL51336-PL-BK 6 Light Matte Instruction Manual

Hukoro FL51336-PL-BK 6 Light Matte

Product Information

Specifications

• Tools Required: Ladder, Safety glasses, Electrical Phillips screwdriver, Flat blade screwdriver, Pliers, Wire strippers
• Hardware Included: Fixture, Fixture Finial, Chain, Canopy, Screw Collar Ring, Mounting Unit
• Bulb Base Type: Candelabra (E12)

Product Usage Instructions

Installation Step 1

1. Attach the Fixture Finial onto the fixture.
2. Use mounting screws to attach the mounting unit to the junction box (not included).

Installation Step 2

1. Choose the length of the chain needed.
2. Attach the end of the chain to the loop on the fixture.

Installation Step 3
Use mounting screws to attach the mounting unit to the junction box (not included).

Installation Step 4

1. Pass the chain and branch wires through the screw collar ring and canopy.
2. Attach the end of the chain to the mounting unit.
3. Feed the branch wires through the pipe nipple on the mounting unit.

Installation Step 5
Make the electrical connection from the junction box to the fixture. Connect the ground wire, live wire, neutral wire, and ground wires using wire nuts and secure with electrical tape.

Installation Step 6
Secure the canopy to the mounting unit with the screw collar ring.

Installation Step 7
Install bulbs (not included) with a Candelabra (E12) base type.

Frequently Asked Questions (FAQ)

• Q: What tools are required for assembly?
  A: The tools required for assembly include a ladder, safety glasses, electrical Phillips screwdriver, flat blade screwdriver, pliers, and wire strippers.

• Q: What type of bulb base does the product use?
  A: The product uses a Candelabra (E12) bulb base type.

ASSEMBLY INSTRUCTIONS

CAUTION

• Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
• Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or b removing the fuse at the fuse box.

If you need further assistance, please contact us by Email: customersupport@superiordecorinc.com

TOOLS REQUIRED

HARDWARE INCLUDED

*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE

EXPLODED PARTS

INSTALLATION

1. STEP 1
   Attach the Fixture Finial onto fixture.

2. STEP 2

3. Choose the length of the chain you need (Open the chain using a phillips screwdriver (not included) and pliers (not included)).

4. Attach the end of the chain to the loop on the fixture.

5. STEP 3
   Use the mounting screws to attach the mounting unit to the junction box (not included).

6. STEP 4

7. Pass the chain and the branch wires through the screw collar ring and canopy.

8. Attach the end of the chain to the mounting unit.

9. Feed the branch wires through the pipe nipple on the mounting unit.
   

10. STEP 5
    Make the electrical connection from the junction box (not included) to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Next, connect the live wire, neutral wire and ground wires with the supplied wire nuts. Secure with electrical tape.

11. STEP 6
    Secure the canopy to the mounting unit with the screw collar ring.

12. STEP 7
    Install bulbs (not included)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>