Jensen Mobile CAR710X 7 Inch Multimedia Receiver User Guide

June 11, 2024
Jensen Mobile

Jensen-Mobile-logo

Jensen Mobile CAR710X 7 Inch Multimedia Receiver

Jensen-Mobile-CAR710X-7-Inch-Multimedia-Receiver-
product

Product Information

The CAR710X is a media receiver designed and engineered in the USA. It features a 7-inch digital TFT display and supports both Android AutoTM and CarPlayTM. The unit comes with a wiring diagram that shows inputs and outputs, including 20PIN and 18PIN connectors for various functions such as IGNITION/ACC 12V(+), GROUND(-), BATTERY(+), ILLUMINATION, REVERSE(+), SWCIN, and more. The unit uses one 15 amp ATC mini-style fuse located on the power connector.

The CAR710X also supports subwoofer output, rear camera input, and SiriusXM (connect tuner and subscription sold separately). The unit has a trim ring and comes with mounting screws. The control locations include RESET, VOL-, VOL+, Power/Mute, SOURCE, and VOICE ACTIVATION BUTTON. The main menu includes Radio/USB/SiriusXM/BT Phone/Android Auto/Apple CarPlay/AV In/BT Audio/Equalizer/Settings modes.

Product Usage Instructions

Installation
Install the CAR710X unit in a location that is not subject to dust, dirt, or excessive vibration. Use the included trim ring and mounting screws to secure the unit in place. Refer to the wiring diagram for the proper connection of inputs and outputs. When replacing a fuse, ensure that the correct type and amperage are used.

Main Menu
To access the main menu, press the corresponding icon on the display. The main menu includes various modes such as Radio, USB, SiriusXM, BT Phone, Android Auto, Apple CarPlay, AV In, BT Audio, Equalizer, and Settings.

USB Operation
From the main menu, select the USB icon to enter USB mode. Use the touch screen to control playback options such as List, Repeat, Random, Search, EQ, Track Up, Play/Pause, and Track Down. Note that video playback is only enabled when the vehicle is in the park and the parking brake is engaged.

SiriusXM Operation
From the main menu, select the SiriusXM icon to enter SiriusXM mode. Use the touch screen to control options such as Band, Program Information, Search, Preset Channel List, Additional Options, Preset Buttons, Direct, Channel Down, Channel Up, Tune/Track Down, Play/Pause, and Tune/Track Up.

General Operation
To access the Settings menu, select Setup from the Main Menu screen. The Settings menu includes categories such as General, Audio, Display, and Others. Select the category and adjust any available options using the touch screen.

Audio Operation
Press the Settings icon on the main menu screen to adjust audio controls such as Fader and Balance, Equalizer (8-Band Tone Control and 8 Presets EQ Settings).

Wiring Diagram Inputs/Outputs

Jensen-Mobile-CAR710X-7-Inch-Multimedia-Receiver-fig-
\(1\)

Note:
When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse could cause damage. The unit uses (1) 15 amp ATC mini style fuse located on the power connector.

Wiring Notes:

Subwoofer output
The Subwoofer preamp audio output (Blue jacket with Black RCA) is active in all audio modes.

Rear camera input
A rearview camera (not included) can be used with the Camera input.

SiriusXM
For more information on how to install the SiriusXM Connect Vehicle tuner, consult the installation guide included with the tuner(SiriusXM Connect tuner and subscription sold separately).

Installation

Before You Start

  • Disconnect the negative battery terminal. Consult a qualified technician for instructions.
  • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt, or excessive vibration.Jensen-Mobile-CAR710X-7-Inch-Multimedia-Receiver-fig- \(2\)

Control Locations

Jensen-Mobile-CAR710X-7-Inch-Multimedia-Receiver-fig-
\(3\)

The radio display features the following functions and displays:

  1. RESET
  2. VOL-
  3. VOL+
  4. Power/Mute
  5. SOURCE
  6. VOICE ACTIVATION BUTTON

Main Menu

In the main menu, press the desired icon to enter the corresponding mode: Radio/USB/SiriusXM/BT Phone/ Android Auto/Apple CarPlay/AV In/BT Audio/ Equalizer/ Settings.

Jensen-Mobile-CAR710X-7-Inch-Multimedia-Receiver-fig-
\(4\)

Operations

Tuner Operation

  1. Main Menu
  2. Current Mode Indicator
  3. Preset Stations
  4. Local/Distance
  5. AS/PS
  6. Keypad
  7. EQ
  8. Seek Tune-Up
  9. Seek Tune Down
  10. AM
  11. FM

USB Operation
From the main menu, touch the USB icon on the main screen.

  1. Main Menu
  2. Current Mode Indicator
  3. List
  4. Repeat
  5. Random
  6. Search
  7. EQ
  8. Track Up
  9. Play/Pause
  10. Track Down

Note:
Video playback is enabled only when the vehicle is in the park and the parking brake is engaged.

SiriusXM® Satellite Radio Operation
From the main menu, touch the SXM icon on the main screen.

  1. Main Menu
  2. Band
  3. Current Mode Indicator
  4. Program Information
  5. Search
  6. Preset Channel List
  7. Additional Options
  8. Preset Buttons
  9. Direct
  10. Channel Down
  11. Channel Up
  12. Tune/Track Down
  13. Play/Pause
  14. Tune/Track Up
General Operation

From the Main Menu screen, select Setup to access the Settings menu and select from categories represented by the icons on the right of the screen: General, Audio, Display, and Others. Select the category, and adjust any of the available options using the touch screen.

Jensen-Mobile-CAR710X-7-Inch-Multimedia-Receiver-fig-
\(8\)

Audio Operation
Press the Settings icon on the main menu screen to adjust Fader and Balance controls, and Equalizer (8-Band Tone Control and 8 Presets EQ Settings).

Jensen-Mobile-CAR710X-7-Inch-Multimedia-Receiver-fig-
\(9\)

CarPlay Operation

Select CarPlay on the Main Menu.
If the iPhone is connected via a USB port, press the CarPlay icon on the main menu to mirror the iPhone’s apps onto the screen. If the iPhone USB cable is inserted into the USB port then the CAR710X will automatically change to CarPlay mode.

Please refer to the online Owner’s Manual for more details.

Android Auto Operation
Select Android Auto on the Main Menu.

If the Android Phone is connected via a USB port, press the Android Auto icon on the main menu to mirror the Android Auto Basic Image onto the screen. If the Android Phone USB cable is inserted into the USB port then the CAR710X will automatically change to Android Auto mode.

Please refer to the online Owner’s Manual for more details.

Bluetooth Operation

Before using Bluetooth
Before you can use a Bluetooth device to make hands-free calls or stream audio. it must be authenticated. This is also referred to as “pairing” a device.

Pairing a New Device
The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device’s name is “CAR710X”. The unit can be in any mode of operation when pairing is performed. On certain phones, pairing may need to be done more than once.

Connect
The head unit will automatically connect to the last connected device when the connect feature is set to Auto connect On. If the connect feature is set to Auto Connect Off, the head unit will not automatically connect to any device.

Bluetooth Phone

  • From the main menu. touch the Bluetooth on the screen.
  • Bluetooth icon will appear anytime a Bluetooth device is connected.

Dialing a Number
Press to display the keypad and dial a number.

Making and Ending a Call
Press to connect a call, and press to end a call.

Transferring Audio
Press to transfer audio between the head unit and mobile phone.

Streaming Audio

  • Press to play or pause the music.
  • Press to skip to the previous track.
  • Press to advance to the next track.

Limited Warranty

*Limited One Year (Or Three Year) Warranty**

This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Namsung America Inc warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year (or three years*) from the date of the original purchase. Namsung America Inc agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equally new, renewed, or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.

Who is covered?
This warranty is extended to the original retail purchaser for products purchased from an authorized JENSEN dealer and used in the U.S.A.

What is covered?
This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found at www.jensenmobile.com.

Warranty Coverage

  • Limited 1-year warranty when purchased from an authorized Jensen dealer.
    or

  • Limited 3-year warranty when purchased from and professionally installed by an authorized Jensen dealer. (Proof of purchase and Installation required)

What to do?

  1. Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.

  2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.

  3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.

  4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:

Exclusion of Certain Damages:
This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim, or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental, or consequential damages.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

www.jensenmobile.com
©2023 Namsung America Inc. All rights reserved.
NSC0323-01 (8368U).

This Quick Start Guide gives you the basics to start using your CAR710X. Please visit
https://www.jensenmobile.com. to download a complete
owner’s manual or call customer service at 1-888-921-4088
(Monday-Friday, 9 AM-5 PM EST).

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals