LEE DING LD-O01361 36 Inch Car Creeper Mechanic Creeper Garage Creeper Instruction Manual

June 4, 2024
LEE DING

LEE DING LD-O01361 36 Inch Car Creeper Mechanic Creeper Garage Creeper

Functions and Uses

Service creeper is widely used equipment for automobile bottom repair and maintenance.

Product Information

Specifications

Service creeper

  • 40 inches: 102 cm 48 cm 11. 5 cm
    • Note: Manual measurement, with slight error
  • Wheels: 3 inches (with 6 wheels and 1 set of screws)
  • Material: PE
  • Production process: Blow molding
  • Bearing capacity: 200kg

Installation method

  1. Check the fittings. There are 1 service creeper and a set of wheels (there are 6 wheels and a set of screws inside.) .
  2. Install as shown in the figure

Part List

Note: Please make sure that every screw can be tightened when installing. Do not use the service creeper with less screws or wheels, so as to avoid the damage of the service creeper caused by the uneven force on each wheel.

Maintenance

  1. Try to avoid wind, rain and sun exposure, which will accelerate the aging of plastics
  2. When used in extremely cold and hot areas, please clean it in time after use, and try to use it at normal temperature to avoid freezing cracking or high temperature aging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals