Litetronics HBS200B6 SL Gen 3 Yoke Mount Kit Round High Bay Instruction Manual
- June 16, 2024
- Litetronics
Table of Contents
Yoke Mount Kit for Round High Bay SL Gen 3
(HBSAM21)
Installation Instructions
Compatible Models
HBS200B6
HBS200B6HV
SAFETY INSTRUCTIONS AND WARNINGS
- When using electrical equipment, basic safety precautions should always be observed
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
- Installation should only be conducted by a qualified electrician in accordance with NEC and any relevant local building codes.
- Be certain electrical power is OFF before and during installation and maintenance.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or sharp objects.
WHAT COMES IN THE BOX
Yoke Mount
Installation Instructions
M5*16MM Screws (x8)
M5 Spring Washer (x8)
M5 Flat Washer (x8)
REQUIRED TOOLS
Allen Wrench
INSTRUCTIONS
Before Installation, carefully remove all parts from the packaging. Inspect
product for defects due to shipping.
Always turn off the power supply from main circuit breaker first!
YOKE INSTALLATION
-
Separate mount head from L-shaped brackets. (Figure 1)
-
Attach L-Shape brackets to round high bay SL with M5 screws and safety cable. (Figure 2)
-
Once L-Shaped brackets are connected to the high bay SL, use M5 screws for mounting head. Angle as necessary, then tighten all screws.
-
Once round high bay SL is supported, attach the included safety cable to a beam or permanent structural support. The yoke can be mounted to a ceiling or wall in various directions.
Note: Properly assembled yoke can be mounted with bolts, anchors or screws. Mounting structure must support the full weight of the fixture in accordance with local codes. -
Turn power back on.
Thank you for choosing
6969 W. 73rd Street
Bedford Park, IL 60638
WWW.LITETRONICS.COM
[email protected]
or 1-800-860-3392
The information and product specifications contained in these instructions are
based upon data believed to be accurate at the time of printing. This
information is subject to change without notice and without incurring
liability. If you have questions regarding specific product details, please
contact us at 800-860-3392 or via email
at
[email protected].
To check for an updated version of these instructions, please visit
www.litetronics.com.
10/27/23-V1