SLV 1007616 Lygant Double LED Instruction Manual

Table of Contents

SLV-1007616-Lygant-Double-LED-product

Specifications

Safety Precautions

Installation should be carried out by an approved electrician following local and national regulations.
Do not alter or modify the product in any way.
Operate the light only with intact protection glass.
If there is any suspicion of a defect or malfunction, contact your dealer or a qualified electrician.
Avoid direct exposure of the active light source to the eyes.
Ensure children are not harmed by the product.

Cleaning and Maintenance

Installation

Switch off mains power before installation.
Use only the described accessories and suitable fastening materials.
Mount the product on a wall surface according to the provided instructions and IP rating.
Ensure proper electrical connections and insulation.
Check for secure fixation and proper function after installation.

Electrical Connection

Direct the fixed wiring into the housing with at least 15mm insulation.
Equip flexible wire ends with suitable wire ferrules for connection.
Connect live conductor to Terminal L, neutral conductor to Terminal N, and protective conductor to Earth terminal.

FAQ:

Q: Who can replace the light source of the luminaire?

A: The light source may only be replaced by the manufacturer, an authorized service technician, or a comparable qualified person.

Q: What should I do if I suspect a defect or malfunction in the product?

A: Take the product out of service and contact your dealer or a qualified electrician for assistance.

220V – 240V ~50/60Hz| 11W| 800 lm| 3000K| **CRI

90| 13,5 x 7,5 x 58,7 cm| 2,20 kg**
---|---|---|---|---|---|---

SLV-1007616-Lygant-Double-LED-fig-2

SLV-1007616-Lygant-Double-LED-fig-3

The light source is only exchangeable by a professional.
The separate control unit is only exchangeable by a professional.
Technical Details are subject to change
Wall Light 1007616 …17 …18 …19
Please read the manual carefully and keep it for further use!
Safety advice for installation and operation.
Disregarding may lead to danger of life, burning, or fire!
Any work on the electrical connection only by the electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Operate only with intact protection glass.
Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
Take measures that children are not harmed by the product.
Do not stare into the active light source.
Additional safety advice =

Safety class I (1) – Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only indoors.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -20°C …35°C.
IP44 : Protection against foreign objects > Ø 1,0mm – Protection against splashing water from all directions.

Light Source

The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician, or a comparable qualified person.
This product contains a light source of the energy efficiency class E.

Direct the fixed wiring with its complete insulation at least 15 mm into the housing.
Equip flexible wire ends with suitable wire ferrules!
Live conductor Terminal L
Neutral conductor Terminal N
Protective conductor Earth terminal
Check secure fixation and proper function!
© 0001 06.07.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0. Made in China.