SLV 1007747 Luminaire for 48V Track System Instruction Manual
- June 17, 2024
- SLV
Table of Contents
SLV 1007747 Luminaire for 48V Track System
Feature
**48 VDC
| 8W
| 3000K
| CRI >90
| Ø 3,5 x 10,7 cm
| 0,23 kg
ta: +35°C max
**
---|---|---|---|---|---
Important Information
INSTRUCTION MANUAL PART A Luminaire for SLV 48V Track System
The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
Operating Manual PART B Luminaire for SLV 48V Track System.
Ø 14 x 4,9 cm| Ø 15,2 x 17 cm| Ø 15 x 1,4 cm| Ø 15 x 1,5
cm
---|---|---|---
1007521| 1007530| 1007533| 1007542
…22| …31| …34| …43
…23| …32| …35| …44
Ø 24 x 6,7 cm| | Ø 22 x 2,8 cm| Ø 22 x 1,5 cm
1007524| 1007536| 1007545
…25| …37| …46
…26| …38| …47
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
Use only with corresponding track system.
Safety class III (3) – Operated with safety extra-low voltage.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): max. +35°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class F.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
Disconnect the complete system from the power supply.
Use only described accessories.
Do not use force when inserting the adapter.
When attaching luminaires pay attention to the admissible mechanical load of
the tracks.
Insert adapter into track.
Turn knob to “ON”.
Suitable Dimmer: DALI dimmer / light control. Note manufacturer`s
instructions.
Adapting the pendant (only by electrician): Open the adapter. Loosen the
strain relief(A). Take out the board carefully. Loosen the wire from the
clamp(B) carefully. Adapt the cable, prepare, tin-coat and reconnect the wire
ends. Insert the board. Secure the strain relief. Close the adapter.
Carry out a continuity test after shortening pendant cable.
Check secure fixation and proper function!