beper 50.401 Handheld Vacuum Cleaner User Manual

: June 4, 2024
: beper

Table of Contents

Precautions
Product and accessories fig.A
Instructions for use
Cleaning
Recharge the appliance
Technical Data
GUARANTEE CERTIFICATE
GUARANTEE CONDITIONS
Documents / Resources

beper 50.401 Handheld Vacuum Cleaner

Precautions

Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.
Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
The appliance can be damaged if the voltage is not correct.
If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
Do not use the appliance if the cable or the plug shows any damages.
Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized
Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
This appliance is for household use only.
To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.

Warning
Do not use the appliance before verifying that each part is intact and correctly mounted; especially check the correct installation of the filter, container and suction accessory.
Do not vacuum cigarette butts, matches, hot or smoking items.
Do not use the device in the presence of toxic or flammable substances, or in the presence of steams or fumes.
Do not vacuum sharp objects such as glasses into pieces, screws, etc.
Do not approach the appliance to eyes, ears, nose, etc.
Do not cover the ventilation openings of the appliance at all.
This appliance is suitable for liquids and solids. After vacuum the liquid, it is recommended not to overturn the appliance, keep the handle facing up to prevent the liquid from escaping from the container, open and empty the container.
Accessories and filter must only be mounted or disassembled when the appliance is switched off.
If the appliance overheats or produces burnt smell during use; If it produces noises other than usual, it is suggested to turn it off and check that the is not clogged.

Product and accessories fig.A

Liquid and solid container
Suction vent
Release button
ON / OFF switch
Engine body
Filter
Charger inlet
Recharge indicator light
Battery charger
Crevice nozzles
Brush
Extension tube

Instructions for use

When using the appliance for the first time, let it charge for some hours so the batteries can charge complete.
Press the release button, remove the liquid and solid container and check that the suction filter is securely fastened.
Insert the desired accessory into the suction vent.
Press the ON / OFF button and vacuum the material.
At the end, switch off the appliance by pressing the ON / OFF button again.
Empty the container after vacuum liquids and / or solids, or when the container is full, by pressing the release button.

Cleaning

Switch off the appliance before cleaning it.
The outer body, the container, the suction accessories can be cleaned with a soft cloth dampened with hot water.
Do not clean with diluents, abrasive products, detergents for plastic or other; could damage the surface.
Take care not to penetrate liquids inside the slots of the appliance.

Recharge the appliance

Switch off the appliance with the ON / OFF button.
Plug the battery charger plug into a socket.
The charging LED on the battery charger light up.
Do not recharge for more than 8-10 hours.
When charging is complete, disconnect the plug from the socket.
For charging use only the supplied original adapter and do not modify the power cord or any other part of the adapter.

Technical Data

Lithium battery pack 7,4v – 2000mah
Adaptor:
Input: 100-240v ~ 50/60hz 0,3a
Output: 9.0V – 1.0A”

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.

The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance

For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we
guarantee repair free of charge on condition that:

– The appliance has been used properly and for the purpose for which it has been intended.
– The appliance has not been tampered with, otherwise it is not maintainable.
– The purchase receipt shall be presented.
– The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.

In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product

Contact your distributor in your country or after sales department Beper.

E-mail assistenza@beper.com which will forward your enquiries to your distributor.

BEPER SRL
Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674 – Fax 045/6984019 beper.com

CUSTOMER CAREBEPER