kogan KATMX25AIOA All in One ThermoBlend User Manual

kogan KATMX25AIOA All in One ThermoBlend User Manual

Using Instruction

Caution

• This appliance is intended for use in household and similar applications.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Please unplug the power cord when cleaning the machine or if it remains without being used for a long time. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid any hazards.
• Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local government for information regarding the available collection systems. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater.
• Please do not immerse the housing into water or clean it with a lot of water to avoid the danger of electric shock or machine damage. Use a moist cloth to scrub and avoid the flow in of water.
• Stir blade is SHARP! Be careful when dismantling or reassembling.
• Food capacity should not exceed 2L.
• Please do not turn on the cover until the machine stops stirring, especially when the speed is above 5.
• When heating or taking out the SS jar after heating, do not touch the SS body to avoid scalding.
• When opening the SS jar cover or steamer cover, be cautious in order to avoid the vapor scalding.

Do not touch the cover when heating.

• Children should be supervised to ensure that they do not play with the appliance. Make sure to place the machine out of the reach of children. Warn children that the machine could become hot and shouldn’t be touched.

• Please press the measuring cup down when the speed is above 5 or crushing frozen food in the Turbo function.

• This machine may move under operation. Please place the machine on a steady table and ensure it remains in a safe distance from table edges to avoid falling.

• Please make sure to keep enough space above the unit when it is in use.

• The machine will stop if overloaded. Be cautious as the red LED will be powered on, with an audio beep
  if overloaded (Figure 1).
  
  The orange LED will be powered on, with an audio beep if the unit is overheated
  (Figure 2)

• Before using, turn the power switch to the “I” position. After use, please turn the power switch to the “O” position.

Technical data

Machine Max. Power: 1400W
Motor power: 600W
Heating Wattage: 1300W
Stir blade unloading: RPM 200 – 10,000.
Material of SS jar: SS 304. Max working capacity is 2L
Voltage: 220 – 240V~
Length of Power cord: 1.3MIntroduction:

Accessories:

Stainless Steel jar, Cover, Basket, Butterfly, Blade guard, Measuring cup, Food steamer and Spatula.

• SS Jar

• Cover

• Basket

• Butterfly

• Blade Guard

• Measure Cap

• Food Steamer

• Spatula
  

Tips before using

Initial setup:
Before the first use, clean the SS jar thoroughly. Put the jar into the housing in the right direction **(Figure 3),

hold the handle of the SS jar and turn it anti-clockwise slowly to the correct position. (Figure 4).

After putting in food ingredients, push the cover shaft into the handle groove (Figure 5) ,

then cover the SS jar. Press the cover down firmly (Figure 6)
to ensure the cover fasten is locked on the housing, then turn the switch clockwise (Figure 7).
**

Plug the power cord and switch on the electrical button on the back bottom of the housing **(Figure 8).

** Set time, temperature and speed on the control panel, and press “Start/Stop” to start the machine.

Removal of the Stainless Steel jar
Press the “Start/Stop” button to stop the machine, then turn the switch on top anti-clockwise and press the cover release button **(Figure 9)

until the latch unlocks. The jar cover shouldn’t be left standing upright (Figure 10) ;

instead you need to take it off after you’re finished (Figure 11).

Finally, hold the handle of the SS jar and turn the jar slowly clockwise from the (Figure 4)** position to the (Figure 3) position. The SS jar can then be taken off from housing.

LCD display
Plug in the machine and switch on the electrical button in the housing. If the SS jar is not placed correctly or the top switch is not switched correctly, the LCD will display as (Figure 12).

When the SS jar is placed correctly, and top switch is switched correctly, the LCD would display as (Figure 13).

Time, temperature and speed can be adjusted under this condition.
Note: For safety considerations, when cover is closed correctly, the top switch cannot be switched to the right place. Please do not switch it by force.

How to dismantle the blade assembly

Figure 14 is blade assembly. While reaching with one hand into the SS jar to hold the semi-circle section on blade assembly

(Figure 15), use the other hand to turn off the nut in an anti-clockwise direction (Figure 16), then pull out the blade assembly.

! Caution: The stirring blade is extremely sharp. To avoid injury, please do not touch the edge directly when dismantling. User should hold the upper part when removing or replacing the blade assembly to avoid the blade assembly falling off, possibly leading to an accident.

How to assemble the blade assembly
Reverse the process of dismantle blade assembly.
Usage and how to use the accessories

1. SS jar cover: To cover the jar, the sealed ring inside can prevent food, soup or vapor spillage; When assembled, the seal ring “ESTA CARA A LA TAPA ↑, FACE UP ↑” warning words should face towards you (see below Figure 17).

Otherwise, the liquid may spill **(Figure 18).

**

2. Measure cup: To cover the jar cover and also to measure liquid food.

3. Basket: Multi-function accessory. Can filter fruit juice and vegetable juice, also can cook vegetables such as potatoes, tomatoes, onions… etc.
   It is very easy to remove the basket. Use the spatula to hook the middle part of the basket handle as shown in (Figure 19).
   
   

4. Spatula: Use to scrape ingredients from the SS jar’s inner wall. When filtering juice, it can also be used to fix the basket, and at the same time to ensure separating the juice from the solid ingredients. (Figure 20)
   

5. Butterfly (must use with Blade guard together): Continuous blending can ensure optimum mixing, and prevent sticking when heating milk, making butter pudding or fruit sauces.
   To assemble and dismantle the butterfly, see Figure21.
   
   To assemble the butterfly, see Figure 22
   

6. Using the two half-circle of the blade guard as a guide, insert the butterfly covering the blade guard, and then rotate down clockwise. To dismantle it, hold the SS jar handle with one hand while the other hand holds the blade guard top to pull it off in force.
   (Attention: When using the butterfly, the speed has to be set to a maximum of 4. Blade guard: Blend & mix soft or liquid foods. Method with using or assembling the blade guard: Before assembling, the user should take off the blade assembly from the SS jar, and then put the blade guard covering in the top surface of the blade. While twisting slightly down, assemble them together in the SS jar and screw down the bottom nut (the blade guard is used under speed 4).

7. Steaming pot: Includes the steaming pot, the steaming disc, and the steaming cover. Could be used to steam large quantity food with similar tastes, such as vegetables, potatoes, thickly sliced meats, sausages and fish… etc.

8. Caution: please pay attention to avoid being scalded by vapor.

How to use the steaming pot in the correct way
Step 1: Put at least 500g water in the SS jar (Figure23).

Figure 23

Step 2: Please assemble the SS jar into position on the unit (Figure 24),

Figure 24

and then put food (such as ice and potato) in filter. Put cover on and ensure the bottom is fastened well and twisted into the right place.

When putting food in the steaming pot, place the easily cooked food on the bottom, and the not so easily cooked food on top. If necessary, the steaming disc could be used to put food on.
Step 3: Cover the steaming pot (Figure 25) so that steaming air won’t be released.

Important reminder:

• When the steaming pot is in use, please keep children well away from machine and notify them of the dangers of the steam.

Operation: Set up the time and steaming temperature on the control panel and press the “Start/Stop” button. The cooking will start accordingly. Steam vapors go to steaming pot through holes in the stainless steel jar cover, and the food will be cooked.

When opening the steam cover, please be careful to put it slightly angled, so that the hot steam vapors spill out rearward, and cooled water can flow into the steaming pot. Take off the cover and put it on the table, then take up the steaming pot and hold it for several seconds. Let cooled water drip into the stainless steel jar cover, and put the steaming pot in the steaming cover.

Operating Instructions

Control panel signal explanation (Figure 26):

TIME ► Displays “Time” indication
TEMP ► Displays “Temperature” indication
SPEED ► Displays “Speed” indication

Control panel instructions

Time: Choose time button
Temp: Choose temperature button
Speed: Choose speed button
Dough: Dough pattern button
Turbo/Push: The highest speed button
+: Adding time, temperature and speed button
-: Reducing time, temperature and speed button
Start/Stop: Start/ Stop button

If you would like to heat or cook food, please follow the following steps

Step 1: Set time
Set up the time by “Time” button; max is 90min.
Press the “Time” button and the “Time ▶” characters will be highlighted; press the “+” button to add more time and the “-” button to remove time. Holding down “+” or “-” button will add or reduce time quickly.
Set up time: Press once “+” or “-” to change times in periods of 1 minute. Double press quickly to indicate seconds.

Step 2: Set temperature
Before cooking, please choose temperature first. If you don’t need heat, please go to step 3. Set up temperature: Press the “Temp” button and the indicator will be highlighted; then press “+” to raise the temperature. Press the “-” button to reduce temperature. Hold “+” or “-” button down to raise or lower temperature quickly.

Note: Every press on “+” or “- will add or reduce 10 degrees Celsius.
Temperature adjusting scope: Heating temperature can be selected from 30 to 120 degrees Celsius.

Step 3: Blade assembly stirring speed set up
Stirring speed set up: Press the “Speed” button and the indicator will be highlighted. Press the “+” button to add speed and press “-” to reduce it. Hold “+” or “-” down to change the speed settings quickly.
Note: When blending, adjust speed to 1-5. When making a sauce, adjust speed to 5-9.

Step 4: Press “Start/Stop” button
After pressing “Start/Stop” button, you will hear the operation tone and the machine will start working. After the machine has started, the set-up time will count down to “00:00” and the machine will beep when the process is finished. In operation status, press “Start/Stop” again, and the machine will stop.
Important notes:

1. If you do not select the heating function or time, but only set up stirring speed, the machine will start and will run under auto time. The max working time is 20 minutes. When the unit has been working for 20 minutes the machine will stop automatically and make a beep sound.
2. When selecting the heating function, it’s necessary to set up time and speed and then start heating or cooking. If you set up the heating temperature but do not set a time, the machine will not start up. When heating is finished (i.e. the time countdown reaches “00:00”), the machine will stop heating but the blade inside the stainless steel jar will continue to stir for 10 min in order to avoid burning the food or sticking to the jar. Once the timer is finished, the stirring will stop and the unit will beep.
3. When choosing the heating function, speed can be set up in maximum speed 5.
4. When the time countdown reaches “00:00”, the machine will beep. The machine will beep again after 5 minutes if no action has been performed in this time.

Dough pattern

Use this pattern to make yeast dough or bread dough (LCD display as figure 27)

Operation: Set up time first, then press the “Dough” button. Finally, press the “Start/Stop” button. This pattern will make the machine operate in the pre-set program, working in 3 speed for 3 second, then stop for 4 seconds and then repeat.

Example: Put 500g flour into the stainless steel jar (it should be thoroughly dry), and place it into position.
Set up the time to 3 minutes, press “Dough” button, and then press the “Start/Stop” button. The machine will work under its pre-set program. Following the procedure, put 300g water slowly into the stainless steel jar (all the amount should be poured in within one minute). Dough will be done within 3 minutes.

Note: When you use dough pattern, the stainless steel jar should be dry before you put the flour to prevent it from sticking to the jar during the blending process. The flour mustn’t exceed 500g, the water shouldn’t exceed 300g, and the set-up time shouldn’t exceed 3 minutes. The proportion between flour and water is 5:3 and the results may be improved if you add some extracted oil into the flour.

Caution: Remove the blade after dough completion; please be cautious to avoid injuries to your hand by the sharp blade.
This machine may move when making dough, so please place it on a steady heat- resistant table, in a safe distance from the edges to avoid falling.
Please do not use the machine without the guards in place, and ensure they don’t fall off during the operation.

Turbo (Pulse) button

No need to set up time and stirring speed, just press the “Turbo (Pulse)” button continuously, and the machine would operate in max speed. The machine will stop when the button is released. This button is used to crash hard food such as ice cubes.
Note: “Turbo” mode will not function under dough pattern.
Caution: If you use Turbo (Pulse) for heated food, the weight of food should not exceed 1000g. The measuring cup should be positioned on the stainless steel jar’s cover to avoid scalding by food spillage.

Cleaning

Before the first use, the unit should be thoroughly cleaned, including all food-contactable accessories. To clean the stainless steel jar and cover, disassemble the blade assembly and the sealing ring first (please take reference of prior instructions)
Use hot water to clean the stainless steel jar and housing (excluding blade). You can also clean the spatula, butterfly, blade guard, filter, measuring cup, cover and steamer at the same time.

Note: In the event of a sticky or un-easily cleaned matter stuck to the stainless steel jar or stainless steel accessory, please make use of a suitable stainless steel detergent.

How to clean the blade assembly
Hold the blade assembly’s bottom and place it under the tap to flush. A scrubbing brush could also be used. Notice: Please pay attention when dismantling the blade assembly to avoid injuring your hand.

How to clean steamer
Please use dishwasher to the clean steamer and the cover. A soft cloth and detergent can also be used.

How to clean the housing
Use a soft cloth or detergent to clean. Please do not use water directly to avoid water going into internal housing areas.
Notice: Unplug unit prior to cleaning.

Using recipes

When preparing the food from your recipe, please consider the order of every process.
Caution: Please ensure the stainless steel jar capacity does not exceed 2 liters.
Set-up order
You will get the best results by following this suggested order:
If you want to cook food, please set time, temperature, speed, and press “Start/Stop” button. If you
want to blend or chop food; please set time, speed, and press “Start/Stop” button.

Example: Cooking Food
a. Set time to 45 minute
b. Choose temperature to 120°
c. Set speed to 3
d. Press the “Start/Stop” button.
Example: Chopping Vegetables
a. Set time to 30 seconds
b. Set speed to 6
c. Press the “Start/Stop” button.
Example: Crushing Ice Cubes
Do not exceed 300g ice cube in SS jar.
a. Set time to 1 minute
b. Set speed to 9
c. Press the “Start/Stop” button
Example: Blending Carrot Juice
Do not exceed 400g carrot in stainless jar and 600g water
a. Set time to 1 minute
b. Set speed to 9
c. Press the “Start/Stop” button
Example: Grinding Coffee
Do not put more than 200 grams of coffee beans into jar
a. Set the time to 2 minute
b. Set speed to 9
c. Press the “Start/Stop” button

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>