STARK TECHNOLOGIES HY-30 Wireless Vibration Detector Instruction Manual
- June 15, 2024
- STARK TECHNOLOGIES
Table of Contents
HY-30 Wireless Vibration Detector
Instruction Manual
HY-30 Wireless Vibration Detector
Wireless Vibration Detector
HY-30
This product a network accessory place us it with our company host
Brief Instruction
This product is a micro power consumption, high stability smart wireless
vibration detector. It adopts advanced signal analysis and processing
technology to ensure product stability from the design. The mechanical
vibration will trigger the detector to alarm when intruder use tools to
destroy buildings and other equipment.
This product is suitable for the prevention of warehouses, fences.ATM machine
that made of reinforced concrete, brick. This wireless vibration detector can
effectively prevent treasury, arms and magazine, museums and other equipment
from chiseling wall, punching hole.
Function Features
- Super micro power consumption design
- Smart signal analysis and processing technology
- Sensitivity support three levels adjustment
- Automatically detect and prompt installed battery’s old and new
- Battery low power prompt function
Technlcal Specification
- Working voltage: DC3V (2pcs CR2032 lithium battery)
- Working current:s1 Ou A (static current), s18mA (alarm current)
- Wireless distance: .!:1 OOM {open area)
- Wireless frequency: 433.92MHz
- Working temperature: -20’C-+60’C
- Working humidity: s80% (without condensation)
Usage Instruction
4.1 Close Detection
When detector is vibrated, the detector red light is on and sends wireless
signal to the alarm panel.
After alarm, detector will automatically turn off the detection for 5 seconds,
after 5 seconds detector will work normally.
4.2 Sensitivity Adjustment
After the detector is installed, please adjust the sensitivity according to
specific situation. H mean high sensitivity, large protection area; L mean low
sensitivity, small protection area.
4.3 Battery Prompt
When user install new battery voltage below 2.6V, the detector will turn
off alarm function and green light will flash.
During the usage, when the battery is low, the detector green light flashes
once every 15 seconds, to remind user to change battery.
Product Installation
The detector’s detection range is related to installation position and Its
structure, and generally installs in the middle of protection area. Once the
Installation position Is selected, the detector can be secured with screws or
double sided tape.
notice
When install the accessories, please avoid installing on objects with a lot of
metal and wires.
Wireless Vibration Detector
User Manual V1 .1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>