INFINITY Luminary Massage Chair Instruction Manual
- June 12, 2024
- Infinity
Table of Contents
INFINITY Luminary Massage Chair
Product Information
The LuminaryTM Massage Chair is a high-quality massage chair designed to provide a relaxing and rejuvenating massage experience. It comes with various features such as an adjustable arm panel, footrest, tablet remote, and tablet holder. The chair is equipped with electrical ports, air connections, and clips for easy assembly.
Product Usage Instructions
- Prior to assembly, carefully unpack all box contents and check them against the list provided in the manual. If anything is missing, contact INFINITY at 603-910-5000.
- Place the chair body on a soft surface for assembly. Identify the left arm panel and place it next to the correct side of the chair.
- Locate and note the electrical connections (A and C) on the chair body, as well as the air connection (B).
- Identify the locations (D and E) where the arm panel attaches to the chair body.
- Starting with the right arm panel, connect the arm panel electrical plugs to the chair body electrical ports (A and C). Attach the arm panel air hose to the chair body air nozzle (B). Lift the arm panel and place the upper big clip on the chair body rail (location E) and the lower small clip on the lower small rail (location D). Slide the arm panel back towards the chair body.
- Insert the provided M8x20mm Bolt and M6x14mm Washer into the footwell holes. Fasten them using the screwdriver.
- Attach the tablet holder to the chair using the provided accessories.
- Review the chair for smooth operation. If any issues are found, review all assembly steps and contact Infinity support at 1-603-910-5000 for assistance.
- Power on the remote and select the AUTO program to start a massage session.
- Register your product at www.infinitymassagechairs.com/warranty to ensure easy warranty processing in the future.
For additional support or information, please visit www.infinitymassagechairs.com or contact Infinity support at 603-910-5000.
Before assembling your chair, watch an assembly video at: www.infinitymassagechairs.com/assembly- tutorials Alternatively, scan the QR code to go directly to the URL above.
SCAN CODE
Step 1:
Prior to assembly, carefully unpack all box contents. Check box contents to
the detail below. Make sure all contents are accounted for. If anything is
missing, please contact INFINITY at
603-910-5000. Do not return to the
place of purchase.
Step 2:
Place the chair body on a soft surface for assembly. Determine the left arm
panel from the right and place next to the correct side of the chair.
Step 3:
Locate and note the 2 electrical connections; locations A, and B. Locate and
note the air connection; location C.
Step 4:
Locate and note the two locations that the arm panel attaches to the chair
body; locations D, and E.
Step 5:
Starting with the right arm panel, connect the arm panel electrical plugs to
the chair body electrical ports; locations A, and C. Then attach the arm panel
air hose to the chair body air nozzle; location B. Next, carefully lift arm
panel, then place the upper big clip on the chair body rail (location E from
step 4) and the lower small clip on the lower small rail (location D from step
4). Make sure the air hoses and electrical wires remain connected and not
pinched. Slide the arm panel back towards the chair body as far as it will go
.
Step 6:
Locate the long, silver M8x20mm Bolt (2), M6x14mm Washer (2) and screw driver
from the Accessory Box. Locate the two holes in the footwell. Insert the screw
and washer into the top hole. Fasten this bolt and washer with the screw
driver. Repeat steps 5-7 with remaining arm panel.
Step 7:
Locate the tablet holder from the accessory box. Place the tablet holder into
the tablet holder mount, making sure to line up the bottom post of the tablet
holder with the inside of the mount, screw down the chrome fastener to secure.
Place the tablet remote into the tablet holder. Connect the tablet remote cord
to the tablet remote port, making sure the notches on either end line up.
Step 8:
Connect the chair power cord to a grounded 110V electrical outlet and plug it
into the respective port on the back side of the base of the chair. Flip the
main power switch to on. Press the power button on the tablet remote to bring
the chair into an upright position. Once chair is in upright position, and
before continuing, turn the main power switch off.
Step 9:
Remove the footrest from its packaging and position it in front of the main
chair body. Connect the footrest electrical plug into the footrest electrical
port. Ensure the thumb release is facing up and push in until it clips. Next,
slide the air hose firmly onto the air nozzle.
Step 10:
Before attaching the footrest to the chair body, remove the clips on the chair
body footrest pins by sliding up. (If Clips are missing, there are spare clips
in the Accessory Box). Next, attach the footrest sleeves to the footrest
mounting bracket as shown.
Step 11:
Lift the footrest and slide one side of the footrest mounting bracket
completely onto the chair body pin. Fasten the clip over the pin to secure.
Carefully align the other side of the mounting bracket with the remaining pin
and slide it on too. Make sure to center the footrest, then fasten the
remaining clip over the pin to secure both sides of the footrest.
Final Check:
Step 12:
lip the Main power switch back ON. Your Luminary Syner-D® Massage Chair is now
complete and ready to use. Either wake up the touch screen by tapping on it
and then hit POWER or simply long press the POWER button on the quick access
panel.
References
- Massage Chairs & Recliners | Infinity Massage Chairs
- Massage Chairs & Recliners | Infinity Massage Chairs
- Massage Chair Assembly Tutorial Videos | Infinity Massage Chairs