ecoer ODU Motherboard Compatibility Setup User Guide

: August 30, 2024
: ecoer

Table of Contents

ODU Motherboard Compatibility Setup
Product Information
Specifications:
Product Usage Instructions:

ODU Motherboard Compatibility Setup

“`html

Product Information

Specifications:

Parts Name: Motherboard component
Ecoer Code: EAC230904156
Product Series: Decades, Decades Extreme, TDi Pro

Product Usage Instructions:

Setup for Motherboard Compatibility:

When using a compatible motherboard (EAC230904165/EAC230904166)
to match TDi Pro series products, no modifications are
required.

However, if you intend to use them to match Decades or Decades
Extreme series products, please follow the steps below for
setup:

Step 1: Set the dip switch of the pressure
switch to the ON position (upper position). Leave the HPS (high
pressure switch) terminal empty. Note that the Decades and Decades
Extreme series do not have the HPS. The yellow-colored HPS port
does not require any wiring.
Step 2: Follow the standard steps for
replacing the motherboard components. Power on the outdoor unit and
keep it in standby mode (do not send any startup commands). Ensure
proper wiring of the motherboard before system power-up.
Step 3: Change the n18 setting from 3 to 1
(for Decades models) or 2 (for Decades Extreme models).
Press BS2 to select n18
Press BS3 to enter
Press BS2 to select
Hold BS1 for 5s to enter
Press BS3 to return to the previous operation
Press BS3 to confirm
Press BS1 to exit Settings
Step 4: After completing the above setup,
please perform a normal operational check on the device to ensure
it is running properly.

FAQ

Q: What should I do if I encounter issues during the setup

process?

A: If you encounter any difficulties or issues during the setup
process, refer to the troubleshooting section of the user manual or
contact our customer support for assistance.

“`

ODU Motherboard Compatibility Setup Guide

WARNING
Disconnect all power to unit before installing or servicing. More than one disconnecting switch may be required to de-energize the equipment. Hazardous voltage can cause server personal injury or death.
A L L phases of this installation must comply with NATIONAL, STATE A N D L O C A L C O D E S

DESCRIPTION
The table provides compatibility explanations for different motherboard components and the corresponding product series they are compatible with.

Parts Name Motherboard component(2436)

Ecoer code EAC230904156

Product Series

Decades

Decades Extreme

TDi Pro

Motherboard component(4860) EAC230904157

Motherboard component(2436) EAC230904158

ODU

Motherboard component(4860) EAC33301000005

Motherboard component(2436) EAC230904165

1

2

3

Motherboard component(4860) EAC230904166

1

2

3

NOTES “1 “: Set n18=1 for compatibility with the Decades series. “2 “: Set n18=2 for compatibility with the Decades Extreme series. “3 “: Set n18=3 for compatibility with the TDi Pro series (Default configuration).

When using a compatible motherboard (EAC230904165/EAC230904166) to match TDi Pro series products, no modifications are required.
However, if you intend to use them to match Decades or Decades Extreme series products, please follow the steps below for setup:
Step 1: Set the dip switch of the pressure switch to the ON position (upper position). Leave the HPS (high pressure switch) terminal empty. Note that the Decades and Decades Extreme series do not have the HPS.

The yellow-colored HPS port does not require any wiring.

ON
1 SW0

Step 2: Follow the standard steps for replacing the motherboard components. Power on the outdoor unit and keep it in standby mode (do not send any startup commands). Ensure proper wiring of the motherboard before system power-up.

Step 3: Change the n18 setting from 3 to 1 (for Decades models) or 2 (for Decades Extreme models).

Press BS2 to select n18

Press BS3 to enter

Press BS2 to select

Hold BS1 for 5s to enter

Press BS3 to return to the previous operation

Press BS3 to confirm
Press BS1 to exit Settings

Step 4: After completing the above setup, please perform a normal operational check on the device to ensure it is running properly.