COOPER HALO HL4RSMF Flat Canless Round to Square New Construction Mounting Frames Owner’s Manual

Table of Contents

Mounting Frames

Specifications

Dimensions

Product Information

Information

Project| | Catalog #| | Type|
---|---|---|---|---|---
Prepared by| | Notes| | Date|

Flat Canless Round-to-Square New Construction Mounting Frames

2″, 3″, 4″, 6″, 8″, & 12″ Flat New Construction Mounting Frames for Round or Square Canless LED Downlights (Does not have drywall collar)

Office • Healthcare • Hospitality • Institutional • Mixed-Use/Retail • Residential

Use in New Construction/Remodeling projects where round or square “install from below” canless LED downlights are installed
Knock-outs allow the frame to accept square fixtures
Reserve the fixture’s location in the ceiling with 8″ to 24″ wide screw-locking hanger bars
Captive integrated thumbscrews hold HALO canless junction boxes to the frame during the rough-in phase
Use to meet local code requirements where canless fixtures need to be supported by building structure

Mounting Frame	Compatible Canless HALO Fixtures (Sold Separately)
HL2RSMF = 2-inch Round-to-Square Canless New Construction Mounting Frame

HALO

LCR2 = 2” Round LED Wall Wash and Downlight

HL3RSMF = 3-inch Round-to-Square Canless New Construction Mounting Frame| HALO

HLA3 = 3” Slim Round Canless Adjustable HLB3 = 3” Slim Round Canless Downlight HLB3S = 3” Slim Square Canless Downlight

LT3-DM = 3” Round Recessed Canless Downlight

HL4RSMF = 4-inch Round-to-Square Canless New Construction Mounting Frame| HALO

HLA4 = 4″ Slim Round Canless Adjustable HLA4S = 4″ Slim Square Canless Adjustable
HLB4 = 4″ Slim Round Canless Downlight (Including HLBE4, HLBSL4, HLBPH4, HLB4-WiZ) HLB4S = 4” Slim Square Canless Downlight
HLB4SP = 4″ Slim Square Canless Downlight (w/ Round Cutout) HLBC4 = 4″ Slim Round Recessed Canless Downlight
HLB4S = 4″ Slim Square Canless Downlight
LT4-DM = 4″ Round Recessed Canless Downlight RL4-DM = 4″ Round Recessed Canless Downlight
RLS4 = 4″ Regressed Sloped Ceiling Canless Adjustable Downlight CJB4 = 4″ Round Integrated JBox Downlight
ML4 = 4″ Round Canless Wall Wash and Downlight LCR4 = 4″ Round LED Wall Wash and Downlight

**HALO Housing**

H245RICAT = 4” Remodel Housing

**HALO Commercia l**

PR4R HC4R

HL6RSMF = 6-inch Round-to-Square Canless New Construction Mounting Frame| HALO

HLB6 = 6″ Slim Round Canless Downlight (Including HLBE6, HLBSL6, HLBPH6, HLB6-WiZ) HLB6S = 6” Slim Square Canless Downlight
HLBC6 = 6″ Slim Round Recessed Canless Downlight LT6-DM = 6″ Round Recessed Canless Downlight RL6-DM = 6″ Round Recessed Canless Downlight
RA6-DM = 6″ Round Recessed Adjustable Canless Gimbal
RLS6 = 6″ Regressed Slope Ceiling Canless Adjustable Downlight CJB6 = 6″ Round Integrated JBox Downlight
LCR6 = 6″ Round LED Wall Wash and Downlight

HALO Commercia l

PR6R HC56R

HL8RSMF = 8-inch Round-to-Square Canless New Construction Mounting Frame| HALO

HL12RSMF = 12-inch Round-to-Square Canless New Construction Mounting Frame| HALO

HLB12 = 12” Slim Round Canless Downlight

Mounting Frame

Galvanized steel mounting frame with offset aperture and integral bar hanger receivers
Locking screws provide positive horizontal locking
Captive thumbscrews provide toolless attachment of the fixture’s remote driver / junction box to the mounting frame for wiring during rough-in phase
Corner knock-outs allow the frame to accept square fixtures. (Cannot revert to round after the knock-outs are removed.)

Bar Hangers