COOPER Lighting Solutions WPS WaveLinx Pro Industrial Fixture Mount High Bay Sensor Owner’s Manual
- June 1, 2024
- COOPER Lighting Solutions
Table of Contents
COOPER Lighting Solutions WPS WaveLinx Pro Industrial Fixture Mount High Bay Sensor
Other Models
WaveLinx
PRO Industrial Fixture Mount High Bay/Low Bay Sensor (WPS*)
Motion and Closed Loop Daylighting including Field Installed Aisle Shield
Typical Applications
Industrial • Manufacturing
Interactive Menu
- Order Information page 2
- Additional Resources page 3
- Connected Systems page 5
- Product Warranty
Product Certification*
- Meets latest ASHRAE Standard 90.1 requirements
- Meets latest IECC requirements
- Meets latest CEC Title 24 requirements
Product Features
-
WaveLinx Mobile App
-
IEEE 802.15.4
-
Device Security
-
Customer Security
-
Daylighting Control
-
Occupancy Sensor
Compatibility
Overview
The PRO Industrial Fixture Mount High Bay / Low Bay Sensor offers passive infrared (PIR) occupancy and a photocell for closed loop daylighting. WaveLinx PRO industrial sensors offer installation heights up to 40 feet and have coverage patterns up to 5000 square feet (see sensor specifications – field of view). When part of WaveLinx PRO, the sensor operates on a wireless mesh network based on IEEE 802.15.4 standards.
The sensors offer simple tool-less integration into WaveLinx PRO industrial light fixtures equipped with the 4-pin Zhaga Book 18 compliant socket. Once installed, sensors receive power from their co-located light fixture with no batteries to replace. The sensor in combination with the WaveLinx Mobile application allows you to gain considerable energy savings from occupancy and daylight sensing lighting control. The WaveLinx Mobile application allows you to map the sensor to any area or control zone, select occupancy or vacancy, occupied and unoccupied light levels and set the hold time.
Product Features & Benefits
- Models suitable for High bay (up to 40ft / 45ft major motion) and Low bay (up to15ft) applications
- Out of the box functionality: Occupied to Full, Unoccupied to 10%, daylighting disabled
- Passive Infra-Red (PIR) motion sensor with coverage up to 5000 square feet
- Integrated photocell for closed loop daylight harvesting
- Software configurable settings with WaveLinx Mobile application
- Simple tool-less twist lock fixture connection via 4-pin Zhaga Book 18 socket
- IP66 rating for warehouse and manufacturing environments
- Energy calculations available through WaveLinx CORE
Order Information
WaveLinx PRO Industrial Fixture Mount High Bay / Low Bay Sensors are
accessories to the WaveLinx connected lighting (WCL) system and requires a
WaveLinx Area Controller (WAC) for full functionality.
WaveLinx PRO Industrial Fixture Mount High Bay / Low Bay Sensors are used to
provide occupancy and daylight dimming to spaces from the industrial light
fixture. For energy code compliance, additional sensors may not be required.
Catalog Number
| Catalog # | Description |
|---|---|
| WPS2-WH | WaveLinx PRO Industrial Fixture Mount Low Bay Sensor, White, 7 |
– 15ft (2.1 – 4.5m)
WPS4-WH| WaveLinx PRO Industrial Fixture Mount High Bay Sensor, White,
15 – 40ft (4.5 – 12.2m)
Notes
For use with industrial light fixtures equipped with the WaveLinx PRO Zhaga
compliant 4-pin socket only.| Notes
When used as a component in the WaveLinx connected lighting system,
WaveLinx PRO system design best practices (including WaveLinx Area Controller
placement, line of sight distances, number of hops, etc.) must be followed.
High mount models accommodate mounting height to 45ft (13.7m) for major motion
(vehicles, fork trucks, etc.) – may not detect minor motion of people
depending on conditions.
Required Accessories
All WaveLinx connected lighting (WCL) system accessories require at least one
WaveLinx Area Controller (WAC2) for communications.
Ensure the bill of material includes one of the following components.
Catalog Number
| Catalog Number | Description |
|---|---|
| WAC2-POE | WaveLinx Area Controller G2, PoE powered |
| WAC2-120 | WaveLinx Area Controller G2 with 120VAC to PoE Injector |
Optional Accessories
For connection to 120VAC outlets.
Catalog Number
| Catalog Number | Description |
|---|---|
| WPOE2-120 | 120VAC to PoE Injector |
Product Specifications
Mechanical
Size : Base Diameter 3.2” (82mm) Height: 1.6” (41mm)
Weight : 0.20 lbs (0.10 kg)
Environment:
-
Operating temperature: -40°F to 131°F (-40°C to 55°C) Sensor passive infrared (PIR) performance may become exceedingly sensitive below -4°F (-20°C)
Note: WaveLinx Area Controller should be installed in an indoor conditioned environment, preferably with line of sight through a window to one or more WaveLinx PRO wireless devices. -
Storage temperature: -40°F to 158°F (-40°C to 70°C)
-
Relative humidity operating: 0% to 95% non-condensing
-
Default behavior intended for indoor use only
Mounting : Fixture mount
Mounting Height : High bay up to 40ft (12m) and Low bay up to15ft (5m)
Color : White
Housing: UV stabilized plastic
Ingress protection : IP66
Light Sensor Detector Shields : Field configured shield included
Daylighting Installation:
- Ensure that sensor is not looking directly at artificial light
- Ensure that sensor is not obstructed
- Use configurable lens mask for desired directionality
Electrical
Input Requirements: Fixture connection via 4-pin Zhaga Book 18 socket
Software Specifications
- Any number of sensors can be mapped to any number of zones
- Mobile app configuration for Occupancy/Vacancy
- Remote Hold Time settings fully configurable via mobile app
- Mobile app configuration of Occupied and Unoccupied light levels
- Energy calculations available through WaveLinx CORE
Wireless Specifications
Radio: 2.4GHz
Standard: IEEE 802.15.4
Transmitter Power: + 8dBm
Range: Sensor to sensor; 160ft (49m) LOS (best practice)
System Performance
Maximum number of nodes supported: 200 per WaveLinx Area Controller (best practice 150 devices)
**Standards/Ratings***
- cULus Listed – Energy Management Equipment (UL916)
- FCC Part 15/ECES-003
- Meets latest ASHRAE Standard 90.1 requirements
- Meets latest IECC requirements
- Meets latest CEC Title 24 requirements
Warranty
Five year warranty standard
Dimensional Details
-
TOP
-
SIDE
Mounting Height
Installation
Both the WPS2 and WPS4 easily install into WaveLinx PRO-ready LED fixtures equipped with Zhaga Book 18 4-pin sockets. Sensor connection is enabled via the simply twistlock connection and provides immediate out-of-the-box functionality.
Field of View – Low Bay
TOP VIEW:
Note: The “beam” pattern obtained depends strongly on the detector used with this array. The pattern shown is intended solely as a general guide and is not to scale.
SIDE VIEW:
Field of View – High Bay
TOP VIEW:
SIDE VIEW:
System Diagram:
This diagram shows the main components of the WaveLinx connected lighting
system with CAT and PRO devices.
The PRO devices communicate using wireless mesh technology based on the IEEE
802.15.4 standard. A PoE LAN connection for each WaveLinx Area Controller
(WAC) is required for power and data access to the building lighting network.
The CAT devices communicate over the category 5 based communication bus and
control the light fixtures using a relay (on/off) and 0-10V output
(dim/raise).
WaveLinx Area Controllers (WAC) communicate with WaveLinx CORE Apps over the
Ethernet network.
View
WaveLinx Network and IT Guidance Technical Guide
Smart Spaces Apps
Control Systems
Customer Support
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.cooperlighting.com
© 2024 Cooper Lighting Solutions
All Rights Reserved.
Specifications and dimensions
subject to change without notice.