COOPER AC-T1 T-Bar Interface Aircraft Cable Mounting Owner’s Manual

COOPER AC-T1 T-Bar Interface Aircraft Cable Mounting

INSTALLATION INSTRUCTION

Corelite luminaires are precision tooled for simple trouble-free contractor installation. Standard aircraft cable connects directly to a 1/4-20 stud at all mounts. Suspension points are 4′-0″, 8′-0″ or 12′-0″ on center. Standard drop lengths are 12″, 15″, 18″, 21″, 24″ & 27″. Optional cable adjuster (AC48,AC120,AC240,AC300,AC360).

FIXTURE INSTALLATION SEQUENCE

1. Layout mounting locations.
2. Ensure that the power feed is at the UL end of the fixture. Power feed: to be installed to local/national electrical codes by a Certified Electrician.
3. Install T-Bar clip to T-Bar and tie back to structure.
4. Place canopy over caddy clip stud and attach aircraft cable.
5. At the end of the 4 x 4 Square Outlet Box break KO in the corner and secure 1/2″ NPT fitting to the box.
6. Clip J-Box Clip to T-Bar.
7. Secure J-Box to J-Box Clip using 1/4″-20 bolt.
8. Secure Snap Bushing to canopy and align up to NPT fitting.
9. Install solid or flexible conduit from the power source to 1/2″ cable fitting and secure to tie wire using Plenum Rated Tie Strap.
10. Feed the power cord through the canopy and J-Box, then install metal strain relief.
11. Attach wires ensuring all connections are properly matched.
12. Cover J-Box using an appropriate cover plate.

Corelite luminaires are precision tooled for simple trouble-free contractor installation. Standard aircraft cable connects directly to a 1/4-20 stud at all mounts. Suspension points are 4′-0″, 8′-0″ or 12′-0″ on center. Standard drop lengths are 12″, 15″, 18″, 21″, 24″ & 27″. Optional cable adjuster (AC48,AC120,AC240,AC300,AC360).

FIXTURE INSTALLATION SEQUENCE

1. Layout mounting locations.
2. Ensure that the power feed is at the UL end of the fixture. Power feed: to be installed to local/national electrical codes by a Certified Electrician.
3. Install T-Bar clip to T-Bar and tie back to structure.
4. Place canopy over caddy clip stud and attach aircraft cable. For Tegular Ceiling Tile applications use (2) 1/4″ washers (supplied) for spacing between the canopy and the ceiling tile. For Deep Tegular Ceiling Tile applications use 1/4-20″ nut (supplied) for spacing between the canopy and the ceiling tile.
5. At the end of the 4 x 4 Square Outlet Box break KO in the corner and secure 1/2″ NPT fitting to the box.
6. Clip J-Box Clip to T-Bar.
7. Secure J-Box to J-Box Clip using 1/4″-20 bolt.
8. Secure Snap Bushing to canopy and align up to NPT fitting.
9. Install solid or flexible conduit from the power source to 1/2″ cable fitting and secure to tie wire using Plenum Rated Tie Strap.
10. Feed the power cord through the canopy and J-Box, then install metal strain relief.
11. Attach wires ensuring all connections are properly matched.
12. Cover J-Box using an appropriate cover plate.

• All regular installs must consult the factory. The depth of the tegular tile will dictate the length of a 1/4″-20 stud and a 1/4″-20 nut may be required. Depth of tegular tile is required upon sign-off.

Tegular Depth:……………………

MOUNTS LOCATIONS

• Not all options are avaliable. Please consult your Cooper Lighting Solutions Representative for availability. Specifications and Dimensions subject to change without notice

Specifications

• Brand: Cooper Lighting Solutions
• Availability: Contact Cooper Lighting Solutions Representative
• Options: Limited options available
• Dimensions: Subject to change

Frequently Asked Questions (FAQ)

Q: How can I check the availability of specific options for the product?
A: You can consult with a Cooper Lighting Solutions Representative to inquire about the availability of specific options.

Q: Are the dimensions of the product fixed?
A: No, the dimensions are subject to change without notice. It is recommended to confirm the dimensions with a Cooper Lighting Solutions Representative.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>