COOPER Lighting Solutions IB51959722 Linear Lensed High Bay Installation Guide
- May 15, 2024
- COOPER Lighting Solutions
Table of Contents
COOPER Lighting Solutions IB51959722 Linear Lensed High Bay
Product Specifications
- Input Voltage : 347-480v, 120-277v
- Power/Lumens Select: Black (Line), White (Neutral), Green (Ground)
- LED Driver Output : Purple (Dim+), Pink (Dim-), Blue (-), Red (+)
Product Usage Instructions
Chain Kit Installation:
- Secure the chain around the structure.
- Insert the chain onto the hook and then insert the hook into the side of the channel as shown.
- Remove the access plate and attach the conduit to it. Make electrical connections according to the wiring diagram. Reattach the access plate to complete the installation.
Wire Guard Installation
- This requires a separate Wireguard kit.
Stem Mount Installation
- Steps for stem mount installation.
Ceiling/Surface Mount Installation
- Steps for ceiling/surface mount installation.
FAQ
Warranties and Liability:
Please refer to www.cooperlighting.com for terms and conditions regarding warranties and limitations of liability.
Contact Information
- Cooper Lighting Solutions 1121 Highway 74 South Peachtree City, GA 30269
- P : 770-486-4800
- Website : www.cooperlighting.com
- Canada Sales: 5925 McLaughlin Road
- P : 905-501-3000
- F : 905-501-3172
Cooper Lighting Solutions is a registered trademark. All trademarks are the property of their respective owners. Product availability, specifications, and compliances are subject to change without notice.
Installation Instructions
WARNING
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this product must be performed by a qualified electrician. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting any maintenance. Disconnect power at the fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow the fixture to cool before handling
or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily
injury and property damage.
- DISCLAIMER OF LIABILITY : Cooper Lighting Solutions assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
- IMPORTANT : Read carefully before installing the fixture. Retain for future reference.
- NOTICE : Green ground screw provided in the proper location. Do not relocate.
- NOTICE : The fixture may become damaged and/or unstable if not installed properly.
- Note : Specifications and dimensions are subject to change without notice.
- ATTENTION Receiving Department : Note the actual fixture description of any shortage or noticeable damage on the delivery receipt. File claim for common carrier (LTL) directly with the carrier. Claims for concealed damage must be filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
General Wiring Diagram
Installation Instructions – Lensed High Bay
INSTALLATION Chain Kit (Included)
- Remove the access plate and attach the conduit to the access plate.
- Make electrical connections according to the wiring diagram.
- Reattach the access plate to complete the installation.
Wire guard installation (Wireguard purchased separately)
- Remove lamp mounting fittings and screws (x2).
- Slide wire guard from side of the fixture to install.
- Secure wire guard to luminaire with M4 screws
Stem Mount Installation (Mount purchased separately)
- Attach stem conduit to the stem mount bracket
- Secure stem mount bracket into fixture slots.
- Attach flexible conduit from stem mount bracket to fixture access plate. Make electrical connections according to wiring diagram. Secure the access plate, stem mount bracket door and stem mount bracket to luminaire to complete installation.
Ceiling/Surface Mount Installation (Mount purchased separately)
- Attach surface mount bracket to structure (by others).
- Attach conduit to fixture access plate. Make electrical connections according to the wiring diagram. Secure the access plate and surface mount bracket to the luminaire
- Secure surface mount bracket to luminaire to complete installation.
Product availability, specifications, and compliances are subject to change without notice
Cooper Lighting Solutions
- 1121 Highway 74 South Peachtree City, GA 30269
- P : 770-486-4800
- www.cooperlighting.com
Canada Sales
- 5925 McLaughlin Road Mississauga, Ontario L5R 1B8
- P : 905-501-3000
- F : 905-501-3172
© 2023 Cooper Lighting Solutions
All Rights Reserved
Publication No. IB51959722 January 4, 2023