JBL LIVE770NC True Adaptive Noise Cancellation Headphones User Guide
- June 15, 2024
- JBL
Table of Contents
JBL LIVE770NC True Adaptive Noise Cancellation Headphones
Specifications:
- Model: LIVE770NC
- Driver size: 40 mm/ 1.6 Dynamic Driver
- Power supply: 5V 1A
- Weight: 256 g/ 0.5643 lbs
- Battery type: Lithium-ion Battery (850 mAh/3.7 V)
- Charging time: 3 hrs from empty
- Music playtime with BT on and ANC off: N/A
- Music playtime with BT on and ANC on: N/A
- Music playtime with BT off and ANC on: N/A
- Talk time with ANC on: N/A
- Talk time with ANC off: N/A
Product Usage Instructions:
To connect the headphones to a device, follow these steps:
- Open the Bluetooth settings on your device.
- Select “JBL LIVE770NC” from the list of available devices.
Multi-Point Connection:
You can connect the JBL LIVE770NC headphones to multiple devices at the
same time. To do this, follow these steps:
- Put the headphones in pairing mode.
- Open the Bluetooth settings on the second device.
- Select “JBL LIVE770NC” from the list of available devices.
Controls:
The JBL LIVE770NC headphones have various controls for different functions:
- Ok Google : Use voice assistants by connecting your headphones to the JBL Headphones app.
- ANC (Active Noise Cancellation): Enable or disable ANC by connecting your headphones to the JBL Headphones app.
- Ambient Aware: Enable or disable Ambient Aware mode by connecting your headphones to the JBL Headphones app.
- TalkThru: Enable or disable TalkThru mode by connecting your headphones to the JBL Headphones app.
Enable advance controls by connecting your JBL LIVE770NC to JBL Headphones app .
WHAT’S IN THE BOX
APP
Power On & Connect:
To power on the JBL LIVE770NC headphones, press and hold the power button
for a few seconds until the LED indicator lights up. To enter pairing mode,
hold the power button for 2 seconds.
Auto Play/Pause:
The JBL LIVE770NC headphones have an auto-play/pause feature. When you
remove the headphones, the music will automatically pause, and when you put
them back on, the music will resume.
Wired Listening Mode:
To use the headphones in wired listening mode, connect the provided audio
cable to the headphones and your audio device. This mode does not require
Bluetooth connectivity.
VoiceAware:
VoiceAware is a feature that allows hands-free voice control. It is only
available on Android devices and requires pre-set-up.
Do More with the App:
The JBL Headphones app provides additional features and controls for your
JBL LIVE770NC headphones. Some features are only available on Android devices
.
Hands-Free Voice Control:
The JBL LIVE770NC headphones support hands-free voice control with Ok
Google and Alexa. To use these features, follow the instructions provided in
the manual.
Get more done on the go. Say “Ok Google” to get started.
- “Play my Workout playlist”
- “Turn on noise canceling”
- “Turn off ambient mode”
- “What’s my schedule today?”
- “Set an alarm for 7 AM”
Note: Only available on Android™ | Pre-set up is required
Ask Alexa to play music, answer questions, play the news, check the weather, set alarms, control compatible smart home devices, and more.
- “Alexa, play today’s hits”
- “Alexa, volume up.”
- “Alexa, skip this song.”
- “Alexa, what’s the weather?”
- “Alexa, turn off the TV.”
- “Alexa, start my commute”
Note: Android™ 6.0 or higher is required for full access to Alexa features when using this device. Alexa isn’t available in all locations.
Charging :
To charge the JBL LIVE770NC headphones, connect them to a power source using
the provided charging cable. The LED indicator will show the charging status.
It takes approximately 3 hours to fully charge the headphones.
Factory Reset:
To perform a factory reset on the headphones, press and hold the power
button for 5 seconds.
LED Behaviors:
The LED indicator on the JBL LIVE770NC headphones provides different
information based on its behavior. Refer to the manual for detailed
explanations of the LED behaviors.
TECH SPEC
- Model: LIVE770NC
- Driver size: 40 mm/ 1.6″ Dynamic Driver
- Power supply: 5 V 1 A
- Weight: 256 g/ 0.5643 lbs
- Battery type: Lithium-ion Battery (850 mAh/3.7 V)
- Charging time: 3 hrs from empty
- Music playtime with BT on and ANC off: up to 65 hrs
- Music playtime with BT on and ANC on: up to 50 hrs
- Music playtime with BT off and ANC on: up to 40 hrs
- Talk time with ANC on: up to 28 hrs
- Talk time with ANC off: up to 33 hrs
- Frequency response: 20 Hz – 40 kHz
- Impedance: 32 ohm
- Sensitivity: 100 dB SPL@1 kHz
- Maximum SPL: 95 dB
- Microphone sensitivity: -40 dBV/Pa@1 kHz
- Bluetooth version: 5.3
- Bluetooth profile version: A2DP 1.4, HFP 1.8, AVRCP 1.6.2
- Bluetooth transmitter frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth transmitter power: ≤ 10dBm (EIRP)
- Bluetooth transmitter modulation: GFSK, π/4-DQPSK, 8DPSK
- Maximum operation temperature: 45 °C
FAQ:
Q: Can I use the JBL LIVE770NC headphones with multiple devices
simultaneously?
A: Yes, you can connect the headphones to multiple devices at the same time
using the multi-point connection feature.
Q: How do I enable ANC, Ambient Aware, and TalkThru modes?
A: You can enable or disable these modes by connecting your headphones to
the JBL Headphones app.
Q: Can I use voice assistants like OK Google and Alexa with the
headphones?
A: Yes, you can use voice assistants by connecting your headphones to the
JBL Headphones app and following the instructions provided.
Q: How long does it take to charge the JBL LIVE770NC headphones?
A: It takes approximately 3 hours to fully charge the headphones.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
Google, Android and Google Play are trademarks of Google LLC.
Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates. Product specifications and app screens are subject to change without notice. HP_JBL_LIVE770NC_QSG_Global_DV2_V3