COOPER Lighting Solutions ONW-P-1001-DMV-W NeoSwitch Passive Infrared Dual Relay Wall Switch Sensor Owner’s Manual

****

COOPER Lighting Solutions ONW-P-1001-DMV-W NeoSwitch Passive Infrared

Dual Relay Wall Switch Sensor

Product Usage Instructions

Overview

The Passive Infrared Dual Relay Occupancy Sensing Wall Switch is a motion- sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads.

Installation

1. Turn off power at the circuit breaker before starting installation.
2. Remove the existing wall switch.
3. Follow the provided wiring diagrams to connect the ONW-P-NeoSwitch.
4. Secure the device in place using the mounting plate and strap.
5. Attach the wallplate included in the package.
6. Turn on the power and test the switch.

Controls and Settings

The ONW-P-NeoSwitch features various controls and settings:

• PIR Lens for motion detection
• DIP switches for adjusting time delay and sensitivity
• Auto/Manual switch for activation mode
• Daylight Sensor for light level detection
• EcoMeter for energy-saving monitoring

Usage

Once installed and configured, the ONW-P-NeoSwitch will automatically control the connected loads based on motion detection and ambient light levels. Users can manually adjust settings using the provided controls for personalized operation.

FAQ

• Q: What is the warranty period for the ONW-P-NeoSwitch?
• A: The product comes with a standard five-year warranty.
• Q: Can the ONW-P-NeoSwitch be used with both incandescent and fluorescent lighting?
• A: Yes, the switch supports a range of wattages for both incandescent and fluorescent lighting at various voltages.

Greengate ONW-P-NeoSwitch

• Passive Infrared/Dual Relay Wall Switch Sensor (Ground Required)

Typical Applications

• Private Offices
• Small Conference Rooms
• Lunch/Break Rooms
• Small Classrooms
• Small Restrooms (no stalls)
• Small Lounges
• Small Waiting Rooms
• Small Closets
• Small Storage Areas

Product Certification

Product Features

Top Product Features

• Air-gap switch ensures no leakage current to load
• Selectable built-in light level sensor
• NEMA WD7 Guide robotic method utilized to verify coverage patterns
• Additional pushbutton with light/fan graphic included LED Rated

Dimensional Details

Scale or Mounting Height

Order Information

• SAMPLE ORDER NUMBER: ONW-P-1001-DMV-W One single gang wallplate included.

Catalog Number

ONW-P-1001-DMV- (-W, V, LA, G, B, R)

| Incandescent: 0-800W @ 120V Fluorescent: 0-1200W @ 120V Fluorescent: 0-2700W @ 277V Max Load/Relay| ****

180°; 1000 sq. ft.

| ****

120/277 VAC, 50/60 Hz

| ****

W=White, V=Ivory, LV=Light Almond, G=Gray, B=Black, R=Red

 |  |  |  | Notes

Not all colours are available in stock and some colour options may have extended lead times.

SAMPLE ORDER NUMBER: ONW-P-1001-D347-W
One single gang wallplate is included. Wallplate not included with 347 VAC Model.

Catalog Number

ONW-P-1001-D347- (-W, V, LA, G, B, R)

| Incandescent: 0-1500W @ 347V Fluorescent: 0-1500W @ 347V Max Load/Relay|

180°; 1000 sq. ft.

| ****

347 VAC, 50/60 Hz

| ****

W=White, V=Ivory, LV=Light Almond, G=Gray, B=Black, R=Red

 |  |  |  | Notes

Not all colours are available in stock and some colour options may have extended lead times.

Product Specifications

Technology

• Passive Infrared (PIR)

Mechanical

• Mounting Plate Dimensions: 4.195” H x 1.732” W (106.55mm x 44mm)
• Mounting Plate/Strap Dimensions: ONW-P-1001-D347: 4.35” H x 1.732” W (110.49mm x 44mm)
• Product Housing Dimensions: 2.618” H x 1.752” W x 1.9” D (66.5mm x 44.5mm x 48.26mm)
• Environment:
  • Operating temperature: 32°F to 104°F (0°C to 40°C)
  • Relative humidity operating: 20% to 90% non-condensing
  • For indoor use only
• Housing: Durable, injection moulded housing. ABS resin complies with UL 94V-0
• Mounting: Fits in a standard 3.5” deep back box. Can be mounted in multiple gang back box Refer to NEC box calculation for properly sized mounting box

Electrical

• Electrical ratings: 120 VAC
• Incandescent / Tungsten max load: 6.7 amps, 800W, 50/60 Hz
• Fluorescent / Ballast max load: 10 amps, 1200W, 50/60 Hz
• Electronic Ballast (LED): 3A
• Motor Load: 1/4 HP @ 125 VAC 277VAC
• Fluorescent / Ballast max load: 9.8 amps, 2700W, 50/60 Hz
• Electronic Ballast (LED): 3A 347VAC
• Fluorescent / Ballast max load: 4.3 amps, 1500W, 50/60 Hz
• Electronic Ballast (LED): 3A

Ballast compatibility:

• LED loads
• Magnetic and Electronic ballasts

Hardware Specifications
LED Indicators:

• Red LED = PIR detection
• Green LED = acts as EcoMeter or night light locator

Controls and Performance

• Time delays:
  • Self-adjusting 15 seconds/test (10 min. Auto)
  • Selectable 5, 15, 30 minutes
• Coverage:
  • Major motion: 36’ x 30’
  • Minor motion: 20’ x 16’
• Light sensing level:
  • 0 to 200-foot candles

Standards/Ratings

• cULus Listed
• FCC Compliant
• RoHS Compliant

Warning

• This product is not intended to be used in applications involving the use of ammonia-based or VOC cleaners.
• Use of ammonia-based or VOC cleaners on this device must be avoided.
• Prolonged use may cause loss of integrity and expose electrified components.
• If this occurs, turn OFF the power to the unit and replace it.
• For detailed cleaning guidelines please refer to: Controls Care and Maintenance instructions at the end of this document.

Warranty

• Five-year warranty standard

Overview

The Passive Infrared Dual Relay Occupancy Sensing Wall Switch is a motion- sensing lighting control and conventional wall switch all-in-one that is used for energy savings and convenience. The unit contains two relays that allow the control of two separate loads. The ONW-P-1001-DMV is designed to detect motion from a heat-emitting source (such as a person entering a room) within its field- view and automatically switch lights ON. These sensors have multi- segmented lenses. For units to sense motion, the person must cross between two segments. The distance between segments increases the farther you are from the sensor, so motion has to be larger the farther you are from the unit. PIR sensors are considered line-of-sight sensors, meaning that the sensor must be able to have a direct line-of-sight to the person making the motion. In Automatic On Mode, the lights turn ON when a person enters the room. In Manual On Mode, the lights are turned ON by pressing the universally recognized light icon pushbutton. Each relay can be set independently to Automatic or Manual On Mode. The sensor includes self-adaptive technology that continuously self- adjusts sensitivity and time delay in real-time, maximizing the potential energy savings that are available in the particular application. The EcoMeter provides a visual indicator of energy usage, increasing end-user awareness and reminding individuals to take control of their lighting to maximize energy savings.

Wiring Diagrams

• Dual level single circuit three-way wiring diagram: Lights will turn OFF automatically when sensor that detected motion last, times out.

Controls

Field of View

Controls Care & Maintenance

• Cooper Lighting Solutions has developed recommended guidelines for cleaning our products that will not impact the operation or finish of the product.

Recommended cleaning tips

• Never spray any fluids directly into the device.
• The use of ammonia-based or VOC cleaners on this device must be avoided. Prolonged use may cause loss of integrity and expose electrified components. If this occurs, turn OFF the power to the unit and replace it.
• Use a damp rag or single-use wipe to avoid excess liquid penetrating the device.
• Be sure to wipe up the remaining excess liquid after cleaning.
• Ensure the cleaning agent used does not have harsh chemicals such as bleach, ammonia, highly alkaline or concentrated acids (such as hydrochloric acid that can be found in household cleaners such as toilet bowl cleaners, bathroom tile and porcelain cleaners) as they could damage the device, causing them to become brittle and discoloured.
• Cooper Lighting Solutions recommends the use of a mild liquid detergent and water to clean the devices. Single-use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however, the single-use wipes cannot contain bleach, ammonia, or highly alkaline or concentrated acids.

WARNING

• This product is not intended for use in applications involving the use of ammonia-based or VOC cleaners.
• Prolonged use may cause loss of integrity and expose electrified components.
• If this occurs, turn OFF the power to the unit and replace it.

Recommended cleaning instructions

• Never spray any fluids directly into the device.
• Apply the mild liquid detergent to a damp cloth or paper towel. Single-use wipes (e.g. Lysol brand or equivalent) are acceptable to use for cleaning the devices, however, single-use wipes cannot contain bleach, ammonia, or highly alkaline or concentrated acids.
• If excess liquid is present, remove it by wringing out the cloth or paper towel to avoid liquid penetration into the device.
• Clean the Cooper Lighting Solutions device by wiping over the surface with a damp cloth.
• Remove the excess liquid remaining on the device with a dry cloth or paper towel.

CONTACT

Cooper Lighting Solutions

• 1121 Highway 74 South
• Peachtree City, GA 30269
• P: 770-486-4800
• www.cooperlighting.com
• For service or technical assistance:
• 1-800-553-38

Canada Sales

• 5925 McLaughlin Road
• Mississauga, Ontario L5R 1B8
• P: 905-501-3000
• F: 905-501-3172

© 2024 Cooper Lighting Solutions All Rights Reserved.
Product availability, specifications, and compliances are subject to change without notice.

References

• Commercial Lighting Company | Cooper Lighting Solutions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>