FORTIN EVO-ONE All In One High Power Data Immobilizer Instruction Manual

: June 16, 2024
: FORTIN

Table of Contents

FORTIN EVO-ONE All-One High Power Data Immobilizer
Product Information
Product Usage Instructions
FAQ
Vehicle functions
WIRING CONNECTION
DCRYPTOR PROGRAMMING PROCEDURE
REMOTE STARTER FUNCTIONALITY
WARNING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FORTIN EVO-ONE All-One High Power Data Immobilizer

FORTIN-EVO-ONE-All--One-High-Power-Data-Immobilizer-
product

Product Information

Specifications

Model: EVO-ONE
Compatible Vehicle: Toyota RAV4
Start Type: Push-to-Start
Year Compatibility: 2022-2023
Firmware Version: 88.[26]
Minimum Manufactured Date: 2019

Product Usage Instructions

Installation Requirements

This module must be installed by a qualified technician. Incorrect connections can cause permanent damage to the vehicle.

Hood Pin Installation (If not equipped)

If the vehicle is not equipped with a functional hood pin, follow these steps:

Set Function A11 to OFF in order to disable remote start with the hood open.
Install the hood pin switch (included) to enable remote start with the hood closed.

Program Bypass Option

To program the bypass option, follow these steps:

Use the FLASH LINK UPDATER or FLASH LINK MOBILE tool (sold separately) to add the firmware version and options.
Select UNIT OPTION C1 for Push-to-Start.
Select UNIT OPTION D6 for Push-to-Start.

Program Remote Starter Option

To program the remote starter option, follow these steps:

Select FUNCTION 34 for remote starter option for R.S.
Select FUNCTION 38 for OEM REMOTE STAND ALONE.
Select FUNCTION 39 for COMFORT GROUP ACTIVATION.
Select MODE 2 for enabling remote start with the OEM remote by pressing 3x Lock.
Select MODE 3 for AUX.1 activation at 5°C, 5 seconds after remote start.

Wiring Connection

Refer to the provided wiring connections guide for proper installation.

FAQ

Q: Can I install the module myself?

A: This module must be installed by a qualified technician to avoid any potential damage to the vehicle.

Q: Can I use the module with a Toyota RAV4 manufactured before 2019?

A: No, this module is only compatible with Toyota RAV4 models manufactured after 2019.

Q: How do I enable remote start with the OEM remote?

A: To enable remote start with the OEM remote, select MODE 2 and press the lock button on the remote three times.

Vehicle functions

Vehicle functions supported in this diagram

NOTES

The vehicles OEM remote and SmartKey are still operable during remote start.

FORTIN-EVO-ONE-All--One-High-Power-Data-Immobilizer-
fig-5

NOTES

FORTIN-EVO-ONE-All--One-High-Power-Data-Immobilizer-
fig-6

WIRING CONNECTION

FORTIN-EVO-ONE-All--One-High-Power-Data-Immobilizer-
fig-7 FORTIN-EVO-
ONE-All--One-High-Power-Data-Immobilizer-fig-9

DCRYPTOR PROGRAMMING PROCEDURE

FORTIN-EVO-ONE-All--One-High-Power-Data-
Immobilizer-fig-10

Press and hold the programming button: Connect the 6-PIN Main harness (White connector).
The LEDs will alternate between BLUE, RED, YELLOW & BLUE/RED flashes.
Release the programming button when the LED is BLUE.
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.
Insert the required remaining connectors.
Press the Push-to-Start button twice, to turn the ignition ON.
The BLUE LED will flash rapidly.
Press the Push-to-Start button once to turn the ignition OFF.
The BLUE LED continues to flash rapidly.
Press the Unlock button on the vehicle OEM remote.
The BLUE LED will turn ON solid.
Press the foot brake pedal.
Press the Push-to-Start button until the ignition turn ON
Release the foot-brake pedal.
The BLUE LED will turn OFF.
The RED LED will turn ON.
Press the Push-to-Start button once to turn off the ignition.
Press the foot brake pedal.
Press the Push-to-Start button until the ignition turn ON.
The RED LED will turn OFF.
The YELLOW LED will turn ON.
Wait,
The RED and YELLOW LEDs will alternate.
Release the foot brake pedal.
Press the Push-to-Start button once to turn off the ignition.

FORTIN-EVO-ONE-All--One-High-Power-Data-Immobilizer-
fig-21

This guide may change without notice. See www.fortin.ca for latest version.

REMOTE STARTER PROGRAMMING PROCEDURE

FORTIN-EVO-ONE-All--One-High-Power-Data-Immobilizer-
fig-23

REMOTE STARTER FUNCTIONALITY

FORTIN-EVO-ONE-All--One-High-Power-Data-Immobilizer-
fig-24

Notice : Updated Firmware and Installation Guides Updated ﬁ rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest ﬁ rmware and download the latest installation guide(s) prior to the installation of this product . FORTIN-EVO-ONE-All--One-High-Power-Data-Immobilizer-
fig-26

WARNING

The information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualiﬁ ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.

TECH SUPPORT