JSR M8-F HD WiFi Mini Projector Instruction Manual

JSR M8-F HD WiFi Mini Projector

Precautions for use

Before using the product, please read the instruction manual carefully and keep it in a safe place in case of urgent use. Please use the machine carefully, and do not drop or hit it at high altitude to avoid damage to the original machine. Put on the lens protection cap after use to avoids cratches.
Please use the standard adapter to supply power to avoid excessive bending and damage of the power cord.

High-Temperature Attention

When the projector is working, it is forbidden to block the inlet or outlet of the product; the distance between the air inlet/ outlet of the machine and the wall must be at least 30cm to avoid damage caused by excessively high temperature caused by poor ventilation

Electric shock preventior

Prevent foreign objects such as paper dust, wire, screws from falling into the machine. In case something falls into the machine, be sure to turn off the power and take it out by professional maintenance personnel. In order to prevent electric shock, please do not disassemble the machine by yourself if there is any problems with the product there are no customer serviceable parts in the machine. To prevent fire and electric shock, do not expose the machine to rain or moisture

Tips

• Only play supported formats or decoded content.
• The picture is clearer and more real in a dim environment Electricity safety-Unplug when not in use
• Do not look directly into the lens with your eyes to avoid burning your eyes.
• Do not use in dusty environment and please keep it on a flat table

Button Functions and Accessories

Top View

1.  Focus Knob
2. Keystone Correction Knob
3. Indicator Light
4. On/Off Button
5. Return Key
6. Navigation + Ok
7. Menu
8. Source Key
9. Volume Down
10. Volume Up
11. Mute Button
12. Home

Side View

1. Speaker Port
2. AV Cable Port
3. TF Card Port
4. HMDI Port
5. USB Port
6. VGA Port
7. Power Cable

Accessories Power Cable

Projector x1

Remote Control x 1

HDMI Cable x 1

AV Line x 1

Power Cable x 1

Instruction Manual x 1

Adjust the projection

When the image of the screen is blurred it is recommended to adjust the focus knob until the image is clear.

When the image is distorted in vertical trapezoid it is recommended to adjust the keystone correction knob until the screen is vertical.

Operation Guide

When the screen is rotated  please place the projector on a horizontal surface.

When the size of the two sides of the screen is different please adjust the position of the projector so that the lens is facing the screen.

Device Connection

Tips: Represents the signal flow direction. The yellow end of the AV cable is the video signal, white is left channel  red is right channel.

Same screen connection instruction for iPhone

The iPhone/iPad and the projector are connected to the same WIFI signal, and then the screen synchronization function is realized. Click Setting on the projector to turn on the WIFI network.

Connect the WIFI signal. When the connection is successful for the first time, it will automatically connect each time after the opportunity is turned on. Only one WIFI signal can be saved.

Enter the password and connect

Open Airplay

Airplay Interface

iPhone/iPad connected to the same WIFI

The iPhone/iPad brings up the console and opens the Screen Mirroring connect the projector device.

Same screen connection instruction for Android

Realize the function of screen synchronization between Android phone/tablet and projector. Open Miracast.

Miracast interface

Now take Samsung mobile phone as an example. Since there are a lots of Android mobile phone manufacturers, the operation interface of different manufacturers is different, please contact customer service for detailed operation.

• Open the console and select Smart View
• Connect the projector device [JH17W_****]
• Click Start now

Support File Format

1024768/12801024/1280800/1440960
16001200/16801050
 VGA|  640480/800600/1024768/12801024
1280720/1440900/19201080/1336768
1280800/1440960/16001200/16801050

This projector supports movies up to 1080P resolution. Does not support Dolby audio and DTS source, when playing directly through U disk or TF card, there will be no sound on the screen Phenomenon, but it can be played by connecting to the projector through the computer.

Best Projection Distance and Size–Max 150 inch

The transmission ratio of this projector is 1.2: 1, subject to the actual product the following picture is for reference only. Shenzhen dingshengying Technology Co., Ltd ADD：7th floor, no.10-5, Minsheng 1st Road, Baoyuan community, Shiyan street, Bao’an District, Shenzhen

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
• To assure continued compliance, any changes or modifications not expressly approved by the party.
• Responsible for compliance could void the user’s authority to operate this equipment.
• Example use only shielded interface cables when connecting to computer or peripheral devices.
• This equipment complies with Part 15 of the FCC Rules.
• Operation is subject to the following two conditions
  •  This device may not cause harmful interference, and
  • This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

The equipment complies with FCC radiation exposure limits set forth for uncontrolled environments. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>