SubZero SZS-C12A Active PA Speaker User Manual

: June 6, 2024
: SUBZERO

Table of Contents

INTRODUCTION
CONTENTS
FEATURES
FUNCTIONS ****
EQ SETTINGS
SPECIFICATIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ACTIVE PA SPEAKER
SZS-C10A / SZS-C12A / SZS-C15A
USER MANUAL

WARNING!
Do not open the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel Do not place the product in a location near a heat source such as a radiator, or in an area subject to direct sunlight, excessive dust, mechanical vibration or shock The product must not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the product No naked flame sources, such as lighted candles, should be placed on the product Allow adequate air circulation and avoid obstructing vents (if present) to prevent internal heat build-up. The ventilation must not be impeded by covering the appliance with items such as newspapers, tablecloths, curtains, etc. The mains plug is used to disconnect the appliance from the mains supply. Ensure that the main outlet is easily- accessible and remove the plug from the main outlet if you notice any abnormality with the appliance.

INTRODUCTION

Thank you for purchasing the SubZero Active PA Speaker. To get the most out of your product, please read this manual carefully.

FEATURES

Clear and balanced sound.
High-quality Class D amplifier.
Four preset EQ modes: Flat, Live, Speech, and DJ.
Accurate and precise piezoelectric tweeter.
High-durable wood and carpet design.
Two input channels with XLR, 6.3mm Jack and RCA Phono connections.

FUNCTIONS ****

BACK PANEL

LEDs CLIP:
When lit, the input signal level is excessive and should be reduced.
SIG: When lit, the speaker is receiving an input signal.
: When lit, the power is on.
EQ MODE SELECTOR
Select your desired EQ mode using this dial. Please see page 6 for further details.
MIX OUT
Outputs a full range combined signal. Use this XLR output to connect an active speaker.
INPUT 2 RCA PHONO
Connect an Instrument or playback device via RCA/Phono.
SPEAKER OUT
Outputs a full range, combined signal. Use this powered 8ohm Speakon (NL4) output to connect a passive speaker.
MASTER LEVEL
Adjust the overall output volume.
MIC/LINE SWITCH
Switch between Mic or Line level impedance.
INPUT 1 LEVEL
Adjust the level for Input 1.
INPUT 1
Connect a microphone or Line level device using either XLR or 6.3mm TRS Jack. Please ensure the MIC/LINE switch is set to the correct position depending on the device connected.
INPUT 2 LEVEL
Adjust the level for Input 2.
I NPUT 2
Connect a Line level device using XLR.
POWER INPUT
Connect the provided AC power cable here.
POWER SWITCH
Turns the speaker on or off

EQ SETTINGS

Below are the details of the 4 EQ settings available to use on the speaker…
FLAT
Completely neutral. No EQ processing is applied, so you hear everything exactly as it is.
Examples:

Using an external audio mixer.
Critical listening in situations where you need to hear unprocessed sound.

LIVE
Cut through audiences for a pronounced sound, with slight low and high-end boosts to add 3D depth.
Examples:

Live gigs, rehearsals, and other musical performances.
Singer-songwriters.
Open mic nights.

SPEECH
A crisp and clear sound, aids clarity in presentations and other speech situations.
Examples:

Presentations in office and classroom environments.
For a public announcement system at an event
Awards and dinner events.
Amplifying drama and theatre on small stages.

DJ
Accurately boosts the bass and treble to help drive dance music and enhance your party’s atmosphere. Ideal for larger venues.
Examples:

Mobile DJs.
Children’s parties
Club events.

SPECIFICATIONS

SZS-C10A

Power Rating …………………………………………………..RMS: 250W
Peak:…………………………………………….350W
Max:…………………….. ……………………………..1000W
Woofer ……………… ……………………10” with 2” voice coil and 40oz ferrite magnet
Tweeter …………………………………. 1” piezoelectric tweeter
Impedance ………………………………….8ohms
Sensitivity …………………………………………………..95dB
Max SPL Rating ………………………………..122dB
Frequency Response ………………………….60Hz – 19KHz
AC Power Input …………………………………..220-240V
Fuse Type ……………………………………………….3.15A
Power Consumption ……………………………………300W
Weight ………………………………………………………..11.6kg
Dimensions ………………………………………………..34 x 29 x 52cm

SZS-C12A

Power Rating ………………………………..RMS: 280W
Peak: ………………………………………………………..400W
Max: ………………………………………………………1100W
Woofer ……………… ……………………………..12” with 2” voice coil and 40oz ferrite magnet
Tweeter ………………………………………… 1” piezoelectric tweeter
Impedance ……………………………………..8ohms
Sensitivity …………………………………………..95dB
Max SPL Rating …………………………………………122.5dB
Frequency Response …………………………………….55Hz – 19KHz
AC Power Input ……………………………………………220-240V
Fuse Type …………………………………………………3.15A
Power Consumption ………………………………….330W
Weight ………………………………………………………13.7kg
Dimensions …………………………………………………….39.5 x 32 x 57.5cm
SZS-C15A

Power Rating . . . . . . . . . . . . .RMS: 280W
Peak:……………………………….. 400W
Max:………………………………… 1100W
Woofer . . . . . . . . . . . . . . . . . ………………..15″ with 2″ voice coil and 40oz ferrite magnet
Tweeter . . . . . . . . . . . . . . . . …………………….1″ piezoelectric tweeter
Impedance . . . . . . . . . . . . . ………………………8ohms
Sensitivity. . . . . . . . . . . . . . . ……………………96dB
Max SPL Rating . . . . . . . . . . ……………………123.5dB
Frequency Response . . . . . ………………………50Hz 19KHz
AC Power Input. . . . . . . . . . ……………………220-240V
Fuse Type. . . . . . . . . . . . . . . ……………………..3.15A
Power Consumption . . . . . ………………………….330W
Weight . . . . . . . . . . . . . . . . . …………………..17.6kg
Dimensions . . . . . . . . . . . . . ……………………45.5 x 35.5 x 69cm

KETTLESTRING LANE
YORK
YO30 4XF
UNITED KINGDOM
If you have any more questions about this product, please do not hesitate to contact the Gear4music
Customer Service
Team on: +44 (0) 330 365 4444 or
info@gear4music.com