SLV 1007548 LED Pendant Light Instruction Manual
- June 16, 2024
- SLV
Table of Contents
Instruction Manual INSTRUC TION MANU AL PART A
Pendant Light
1007548
1007549
1007550
1007548 LED Pendant Light
The
installation requires expert knowledge and may be carried out only by an
approved electrician under consideration of local and national
regulations!The light
source is only exchangeable by a professional. The separate control unit is
only exchangeable by a professional.
Technical Details are subject to change.
SLV UK
Unit E Chiltern Park
Boscombe Road, Bedfordshire
LUS5 4LT
Operating Manual PART B
Pendant Light
1007548 …49 ..50
Read manual carefully and keep for further use!
A Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices = ****
Use as directed
Safety class II (2) . Safety insulated – Connection
without protective
conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inflammable surfaces.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -20°C …+25°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class E.
Care / Storage
**** Disconnect product from mains and let it cool down.
Clean extemal surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
**** Switch off mains / fixed connection cable!
Use only described accessories.
Only suited for recessed ceiling installation.
Keep sufficient distance to inflammable materials.
Ensure sufficient aeration.
:Do not cover, especially not with insulating materials.
Install as shown in the figure.
Adapting the pendant cable: Loosen strain relief(A). Push pendant cable
into canopy. Secure the strain relief.
Suitable Dimmer: Trailing-edge phase dimmer (Code C). Note manufacturers
instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Direct the fixed installation cable through strain relief.
Secure strain relief.
Ensure that the fixed installation cable is securely kept by the strain
relief.
Live conductor > TerminalL
Neutral conductor > Terminal N
****Check secure fixation and proper function!
© 0001 14. 07. 2023 SLV GmbH ,
Daimlerst r . 21 -23, 52531
Übach-Pale nberg, Germany,
Tel. + 49 (0)2451 4833-0.
Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>