SLV 1007600 Wall Light Instruction Manual
- June 16, 2024
- SLV
Table of Contents
1007600 Wall Light
Instruction Manual
1007600 Wall Light
INSTRUCTION MANUAL PARTA
Wall Light
The inst allation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and nat ional regulat ions!
SLV UK
Unit E Chiltern Park
Boscombe Road, Bedfordshire
LU5 4LT
Operating Manual PART B
Wall Light
1007600 …01 …02 …03
Read manual carefully and keep for further use!
satety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Operate only with intact protection glass.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Additional safety advices =
Use as directed
Safety classI (1 ) ****– Connection with protective conductor.
Operate only firmly fixed on an even surface.
Operate only on normal or not inf l ammable surfaces.
Operate only indoors.
Do not strain mechanically or expose to strong dirtcont amination.
IP 44: Protection against fo reign object s > Ø 1, 0 mm – Prot ect i on
against
splashing water from all directions.
Admissible ambient temperat ure(ta ): -20°C . . . + 4 0 °C°C.
Lamp replacement
Disconnect luminaire from mains and let it cool down.
Suitable light sources: E14, 6W max.
Care / Storage
Disconnect luminaire from mains and let it cool down.
Suitable light sources: E14, 6W max.
Care / Storage
Disconnect product from mains and let it cool down.
Clean extemal surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for wall surface mounting.
Install according to declared IP type.
Install as shown in the figure.
Electrical connection
Direct the fixed wiring with its complete insulation at least 15 mm into the
housing.
Equip flexible wire ends with suitable wire ferrules!
Live conductor → Terminal L
Neutral conductor → Terminal N
Protective conductor → Earth terminal
check secure fixation and proper function!
0001 14.06.2023 © SLV GmbH , Daimlerstr . 21 -23, 52531 Übach-Pale nber g, Germany, Tel. + 49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>