SLV 1007604 Ceiling Mounted Light Instruction Manual

June 16, 2024
SLV

SLV 1007604 Ceiling Mounted Light

Product Information

  • General Information
    • Protection Class: IP44
    • Operating Temperature Range: -20°C to +40°C
    • Electrical Specifications: 220V-240V ~ 50/60Hz
    • Lamp Type: LED E14
    • Maximum Wattage: 6W
    • Fixture Dimensions: Ø 12 x 17.8 cm
    • Weight: 0.52 kg

Product Specifications

Product Code Maximum Lamp Diameter Maximum Ceiling Cutout Diameter
1007604 11 cm 3.8 cm
1007605 11 cm 3.8 cm
1007606 11 cm 3.8 cm
1007607 11 cm 3.8 cm

Product Instruction

  • Installation and Safety Instructions
    • Ensure power is switched off before installation or maintenance.
    • Installation and electrical connections must be performed by a qualified electrician.
    • Do not alter or modify the product.
    • Use only the described accessories and suitable mounting materials.
    • Install according to the declared IP type and by the provided diagram.
    • For lamp replacement, disconnect the luminaire from the mains and allow it to cool down before handling.
    • Regularly clean external surfaces with a slightly moistened cloth and store them in a dry, clean place.
  • Lamp Replacement and Maintenance
    • Allow the lamp to cool before replacing it.
    • Approved lamp types: E14, Max 6W.
    • Clean the luminaire with a dry cloth after disconnecting it from the power source.
  • FAQ
    • What is the maximum wattage for the lamps used in these fixtures?
    • The maximum wattage is 6W for lamps used in these fixtures.
    • Can I install this fixture myself?
    • No, installation and electrical connections should be carried out by a qualified electrician.
    • How do I clean the luminaire?
    • Disconnect the luminaire from the power source and use a slightly moistened cloth to clean the external surfaces.
    • What should I do if the luminaire is not functioning properly?
    • Disconnect it from the power source and contact a qualified electrician for inspection and repair.
  • Manufacturer and Contact Information
    • SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany. Tel. +49 (0)2451 4833-0. Made in China.

Technical Specification

WHAT INBOX

INSTALLATION

PART A Ceiling Light

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

Operating Instruction

Operating Manual PART B Ceiling Light 1007604 …05 …06 …07

  • Read the manual carefully and keep it for further use!
  • Safety advice for installation and operation.
  • Disregarding may lead to danger of life, burning or fire!
  • Any work on the electrical connection only by the electrician.
  • Do not alter or modify the product.
  • Do not fasten anything on the product.
  • Do not cover the product.
  • Operate only with intact protection glass.
  • Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
  • Take measures that children are not harmed by the product.
  • Additional safety advice =

Use as directed

  • Safety class I (1) – Connection with protective conductor.
  • Operate only firmly fixed on an even surface.
  • Operate only on normal or not inflammable surfaces.
  • Operate only indoors.
  • Do not strain mechanically or expose to strong dirt contamination.
  • IP44: Protection against foreign objects > Ø 1,0mm – Protection against splashing water from all directions.
  • Admissible ambient temperature(ta): -20°C …+40°C.

Lamp replacement

  • Disconnect the luminaire from the mains and let it cool down.
  • Suitable light sources: E14, 6W max.

Care / Storage

  • Disconnect the product from the mains and let it cool down.
  • Clean external surfaces regularly with a slightly moistened (water) cloth.
  • Store dry and clean.

Installation

  • Switch off mains / fixed connection cable!
  • Use only described accessories.
  • Use only suitable fastening materials.
  • Only suited for ceiling surface mounting.
  • Install according to the declared IP type.
  • Install as shown in the figure.

Electrical connection

  • Direct the fixed wiring with its complete insulation at least 15 mm into the housing.
  • Equip wires of the fixed wiring with protective tubes.
  • Equip flexible wire ends with suitable wire ferrules!
  • Live conductor Terminal L
  • Neutral conductor Terminal N
  • Protective conductor Earth terminal
  • Check secure fixation and proper function!

CONTACT

  • © 0001 12.06.2023 SLV GmbH,
  • Daimler. 21-23, 52531 Übach-Palenberg,
  • Germany,
  • Tel. +49 (0)2451 4833-0.
  • Made in China.
    • 1007604
    • 1007605
    • 1007606
    • 1007607

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals