SLV 1007464 Floor Lamp Instruction Manual

June 16, 2024
SLV

SLV 1007464 Floor Lamp

SLV-1007464-Floor-Lamp-product

Product Information

Specifications

  • Model Numbers: 1007462, 1007463, 1007464
  • Input Voltage: 200V-240V
  • Frequency: 50/60Hz
  • Power Consumption: 100W
  • Light Output:
    • Downlight: 2300 lm
    • Uplight: 10700 lm
  • Color Temperature: 4000K
  • Color Rendering Index (CRI): >80
  • Dimensions: 83.5 x 24 x 196 cm
  • Weight: 14.10 kg

Product Usage Instructions

Section 1: Installation

  1. Unpack the product and ensure all components are present.
  2. Choose a suitable location for installation.
  3. Make sure the power supply matches the input voltage requirement (200V-240V ~50/60Hz).
  4. Securely mount the product using the provided mounting hardware.
  5. Connect the product to the power supply.

Section 2: Operating Modes
The product has three operating modes:

  1. Indirect Light ON/OFF: Controls the indirect lighting feature.
  2. Direct Light ON/OFF: Controls the direct lighting feature.
  3. Overall ON/OFF: Controls the overall power supply to the product.

Section 3: Usage
To use the product:

  1. Ensure the product is connected to a power source.
  2. Turn on the overall power supply using the ON/OFF switch.
  3. For indirect lighting, toggle the Indirect Light ON/OFF switch.
  4. For direct lighting, toggle the Direct Light ON/OFF switch.
  5. Adjust the lighting intensity as desired using any available dimming controls (if applicable).
  6. To turn off the product, turn off the overall power supply using the ON/OFF switch.

Frequently Asked Questions (FAQ)

  • Q: What are the available model numbers for this product?
    A: The available model numbers for this product are 1007462, 1007463, and
  • Q: What is the power consumption of this product?
    A: This product consumes 100W of power.

  • Q: What is the color temperature of the light emitted by this product?
    A: The color temperature of the light emitted is 4000K.

  • Q: What is the Color Rendering Index (CRI) of this product?
    A: The Color Rendering Index (CRI) of this product is greater than 80.

  • Q: What are the dimensions and weight of this product?
    A: The dimensions of this product are 83.5 x 24 x 196 cm and it weighs 14.10 kg.

INSTRUCTION MANUAL PART A Floor lamp

  • 1007462
  • 1007463
  • 1007464

SLV-1007464-Floor-Lamp- \(1\)

SLV-1007464-Floor-Lamp- \(2\)

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

The light source is only replaceable by a professional. The separate control unit is only replaceable by a professional.

Operating Manual PART B

Floor Stand Luminaire
1007462 …63 …64

Read manual carefully and keep for further use!
Safety advices for installation and operation. Disregard may lead to danger of life, burning or fire!

  • Do not alter or modify the product.
  • Do not fasten anything on the product.
  • Do not cover the product.
  • Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
  • Take measures that children get not harmed by the product.
  • If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or a qualified electrician to avoid hazard.
  • Do not stare into the active light source.
  • Additional safety advices =

Use as directed

  • Safety class I (1) – Connection with protective conductor. Operate only on an even, stable and tilt-fixed surface.
  • Operate only in dry indoor area.
  • Do not strain mechanically or expose to strong dirt contamination. Admissible ambient temperature(ta): -20°C …+45°C.

Light Source

  • The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
  • This product contains a light source of the energy efficiency class D.
  • This product contains a light source of the energy efficiency class C.

Care / Storage

  • Disconnect product from mains and let it cool down.
  • Clean external surfaces regularly with a slightly moistened (water) cloth.
  • Store dry and clean.

Installation

It is recommended to assemble the product in a lying position. Install as shown in the figure.

Placement
Place in a way that product poses no danger(e.g. stumbling).

Putting into service
Connect mains plug with mains plug socket.

Motion Sensor
After 10 min. of no motion detection the brightness is reduced to 10%.
After another 10 min. of no motion detection the light is switched off.
As soon as a motion is detected the light switches to the adjusted brightness.

Daylight Control
When the daylight control is running, the light keeps the adjusted brightness on the illuminated surface regardsless of the surrounding light.

Button assignment

SLV-1007464-Floor-Lamp- \(9\)

Check for secure standing and proper function!

© 0001 10.05.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals