SLV 1005390 Floor Lamp Installation Guide
- June 16, 2024
- SLV
Table of Contents
**SLV 1005390 Floor Lamp Installation Guide
**
Operation Instruction
| | |
---|---|---|---
0| |
1| |
2| |
3| |
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only replaceable by a professional. The control gear is not replaceable.
SLV UK
Unit E Chiltern Park Boscombe Road, Bedfordshire
LU5 4LT
Read manual carefully and keep for further use!
Safety advices for installation and operation. Disregard may lead to danger of life, burning or fire!
Do not alter or modify the product. Do not fasten anything on the product. Do not cover the product. Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician. Take measures that children get not harmed by the product. The external flexible cable is of a special type and may only replaced by the same type. This special cable is available at your specialist dealer.
Do not stare into the active light source.
Additional safety advices = ****
Use as directed
Safety class I (1) – Connection with protective conductor.
Operate only on an even, stable and tilt-fixed surface.
Operate only in dry indoor area.
Do not strain mechanically or expose to strong dirt contamination.
Admissible ambient temperature(ta): -20°C …+45°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
This product contains a light source of the energy efficiency class E.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
It is recommended to assemble the product in a lying position. Install as shown in the figure.
Placement
Place in a way that product poses no danger(e.g. stumbling).
Putting into service
Connect mains plug with mains plug socket.
Motion Sensor
After 30 min. of no motion detection the brightness is reduced to 30%. After another 30 min. of no motion detection the light is switched off. As soon as a motion is detected the light switches to the adjusted brightness.
Daylight Control
When the daylight control is running, the light keeps the adjusted brightness on the illuminated surface regardless of the surrounding light.
**** Check for secure standing and proper function!
200V-240V ~50/60Hz| 79W| 2x 3800 lm| 4000K| CRI >80|
69,2 x 195 x 31 cm| 17,10 kg
---|---|---|---|---|---|---
Documents / Resources
| SLV
1005390 Floor
Lamp
[pdf] Installation Guide
1005390 Floor Lamp, 1005390, Floor Lamp, Lamp
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>