beper BB.002 Electric Kettle Instruction Manual
- June 4, 2024
- beper
Table of Contents
BB.002 Electric Kettle
Instruction Manual
For further information and/or instructions for use in other languages,
please visit: beper.com
Cod.: BB.002
Precautions
Read the following instructions carefully, since they give you useful safety information about installation, use, and maintenance and help you avoid mishaps and possible accidents.
- Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
- The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from dangerous sources. It is recommended not to throw these packing materials in domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information from the manager of the Sanitation Department of your own municipality.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
- The appliance can be damaged if the voltage is not correct.
- If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance’s power absorption.
- Generally, the use of adaptors with multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptors is not exceeded.
- Do not use the appliance if the cable or the plug shows any damage. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beer after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
- This appliance is to be destined for its special purpose only. Any other use is to be considered improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong, or incautious use.
- This appliance is for household use only.
- To protect against electric shock, do not immerse the cord, plug, or any parts of the appliance in water or other fluids. Do not use the appliance near explosives, highly flammable materials, gases, or burning flames.
Do not allow children, disabled people, or people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance is used by or near children.
Use advice
- The kettle must be used only on its provided base.
- Use the kettle only to boil water.
- Do not turn on the kettle without closing the lid.
- Switch off the kettle before removing it from the base.
- Never immerse any parts of the kettle in water or other liquids.
- Do not fill the kettle under the min level or above the max level.
- Before the first use, make sure to rinse properly the kettle.
Description Fig.A
- Lid
- Pouring spout
- Handle
- Water level indicator
- Kettle body
- On/off switch
- Power indicator light
- Base
How to use it
- Place the kettle on a stable surface.
- Remove the kettle body from the base and fill it with water, respecting min and max levels indicated on the water level indicator. Water can be filled by opening the lid or through the pouring spout. Close the lid and put the kettle body on the base. Plug the appliance into the electric socket.
- Press the on/off switch downwards and the kettle starts to operate. The power indicator lights up. When both the switch and the light turn off, water is ready to be used.
- Press the on/off switch upwards to interrupt the cooking anytime in case of necessity.
- Lift the kettle body only by the handle.
- The kettle body becomes very hot and must not be touched directly with hands.
- Disconnect the cord supply from the electric socket.
Cleaning
- Unplug the appliance from the socket.
- Let it cool down and clean it with a damp sponge.
- Do never use an abrasive sponge to clean it.
- Clean regularly, at least once a month if the water is had or more if the water is very hard.
To remove lime scale, use
- White wine vinegar 8°
- Fill the kettle with ½ liter of vinegar.
- Let it for about one hour without heating it.
- Empty the kettle and rinse it 5 or 6 times.
- Repeat if necessary.
Acid citric
- Make boiled 1 liter of water – add 25 g of acid citric and let it rest for about 15 minutes.
- Empty the kettle and rinse it 5 or 6 times.
- Repeat if necessary.
- Do not use other methods or detergents to remove limescale.
In case of
Use while empty
The kettle is on but without water in or the limescale activates the safety
system and blocks the unit: let the kettle cool down and fill it with water.
Use the on/off switch to turn it on: the kettle will start again after approx.
15 Minutes.
Smelly water
It does happen when the kettle is new. For the first time of use, throw away
water. If the problem remains, fill the kettle to the max. Level, and add 2
spoons of bicarbonate; boil it, throw away water, and rinse the kettle body.
Technical data
Power: 1370-1630W
Power supply: 220-240V ~ 50/60Hz
For any improvement reasons, Beer reserves the right to modify or improve
the product without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment
(WEEE), requires that old household electrical appliances must not be disposed
of in the normal unsorted municipal waste stream. Old appliances must be
collected separately in order to optimize the recovery and recycling of the
materials they contain and reduce the impact on human health and the
environment. The crossed-out “wheeled bin” symbol on the product reminds you
of your obligation, that when you dispose of the appliance, it must be
separately collected.
GUARANTEE CERTIFICATE
This appliance has been checked in the factory. From the date of the original
purchase, a 24-month guarantee applies to material and production defects. The
purchase receipt and the guarantee certificate must be submitted together in
case of a claim to guarantee.
The guarantee is valid only with a guaranty certificate and proof of
purchase (fiscal receipt) indicating the date of purchase and the model of the
appliance
For any technical assistance, please contact directly the seller or our head
office in order to preserve the appliance’s efficiency and NOT TO avoid the
guarantee. Any intervention on this appliance by non-authorized persons will
automatically void the guarantee.
GUARANTEE CONDITIONS
If the appliance shows defects as a result of faulty material and/or
production during the period of guarantee, we guarantee repair free of charge
on condition that:
- The appliance has been used properly and for the purpose for which it has been intended.
- The appliance has not been tampered with, otherwise, it is not maintainable.
- The purchase receipt shall be presented.
- The appliance showing fair wear and tear shall not be covered by this guarantee.
Therefore, any part that could be accidentally broken or have visible signs of
use in consumable products (such as lamps, batteries, heating elements…) the
aesthetic parts are excluded from the guarantee, and any defect whatsoever
resulting from non-respect of the rules for use, negligence in usage and/or
maintenance of the appliance, carelessness, wrong or improper installation,
damage during transport and any other damage not attributable the supplier.
For every defect that could not be repaired within the guarantee period, the
appliance will be replaced free of charge.
In any case, if the part to be replaced for defect, breakage or malfunction is
an accessory and/or a detachable part of the product, Beer reserves the right
to replace only the very part in question and not the entire product
Contact your distributor in your country or after-sales department Beer.
E-mail: assistenza@beper.com which will
forward your inquiries to your distributor.
CUSTOMER CARE BEPER
http://customercare.beper.com/support/home
BEPER SRL
Via Salieri, 30 – 37050
Vallese di Oppeano – Verona
Tel. 045/7134674
Fax 045/6984019
beper.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>