SLV Varyt 1007600 Wall Light Instruction Manual

June 16, 2024
SLV

SLV Varyt 1007600 Wall Light

Product Information

Specifications

  • Model : A
  • IP Rating : IP44
  • Voltage: 220V-240V
  • Frequency: 50/60Hz
  • LED Type : E14
  • Maximum Wattage: 6W
  • Dimensions: 12 x 19.2 x 15 cm
  • Weight : 0.81 kg

Product Usage Instructions

Safety Instructions

Read the manual carefully and keep it for further use. Disregarding the safety instructions may lead to danger of life, burning, or fire. Any works on the electrical connection should  only be done by an approved electrician. Do not alter or modify the product. Do not fasten anything on the product. Do not cover the product. Operate only with intact protection glass. Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician. Take measures to ensure children are not harmed by the product

Lamp Replacement

Before replacing the lamp, disconnect the luminaire from the mains and let it cool down. Use only suitable light sources with an E14 base and a maximum wattage of 6W.

Care and Storage

To clean the external surfaces of the product, regularly use a slightly moistened cloth with water. Disconnect the product from the mains and let it cool down before cleaning. Store the product in a dry and clean place.

Installation Instructions

Electrical Connection

When connecting the fixed wiring, ensure that its complete insulation is directed at least 15 mm into the housing. Equip flexible wire ends with suitable wire ferrules. Check for secure fixation and proper function of the electrical connection.

Mounting

Switch off the mains or fixed connection cable before installation. Use only the described accessories and suitable fastening materials. The product is only suited for wall surface mounting. Install it according to the declared IP type and as shown in the figure.

FAQ

Q: Can I install the product myself?

A : No, the installation requires expert knowledge and must be carried out only by an approved electrician under consideration of local and national regulations.

Q: What should I do if I suspect a defect or malfunction?

A : Take the product out of service and contact your dealer or a qualified electrician for assistance.

Q: What light sources can I use for lamp replacement?

A: Use only E14 base light sources with a maximum wattage of 6W.

SPECIFICATION

TOOLS

INSTALLATION INSTRUCTIONS

INSTRUCTION MANUAL PART A Wall Light

The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!

Operating Manual PART B

Wall Light 1007600 …01 …02 …03

Read manual carefully and keep for further use!

Safety advices for installation and operation.

  • Disregard may lead to danger of life, burning or fire! Any works on the electrical connection only by electrician.
  • Do not alter or modify the product.
  • Do not fasten anything on the product.
  • Do not cover the product.
  • Operate only with intact protection glass.
  • Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
  • Take measures that children get not harmed by the product.
  • Additional safety advices

Use as directed

  • Safety class I – Connection with protective conductor.
  • Operate only firmly fixed on an even surface.
  • Operate only on normal or not inflammable surfaces.
  • Operate only indoors.
  • Do not strain mechanically or expose to strong dirt contamination.
  • IP44 : Protection against foreign objects > Ø 1,0mm – Protection against splashing water from all directions. Admissible ambient temperature(ta): -20°C …+40°C°C.

Lamp replacement

Disconnect luminaire from mains and let it cool down. Suitable light sources: E14, 6W max.

Care / Storage

Disconnect product from mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.

Installation

Switch off mains / fixed connection cable! Use only described accessories. Use only suitable fastening materials. Only suited for wall surface mounting. Install according to declared IP type. Install as shown in the figure.

Electrical connection

Direct the fixed wiring with its complete insulation at least 15 mm into the housing.
Equip flexible wire ends with suitable wire ferrules!
Live conductor Terminal L
Neutral conductor Terminal N
Protective conductor Earth terminal
Check secure fixation and proper function!

0001 14.06.2023 © SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,

Tel. +49 (0)2451 4833-0.

Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals