SLV 1004684 Monopoint 3 Phase Dali Track Instruction Manual
- June 16, 2024
- SLV
Table of Contents
SLV 1004684 Monopoint 3 Phase Dali Track Instruction Manual
Product Information
Specifications
- Product Name: Phasenadapter
- Model Number: 1004684 1004585
- Dimensions: 20 mm
- Maximum Load: 50N
- Safety Class: I (1)
INSTRUCTION MANUAL PART A
Warning
Tool Required
Product Usage Instructions
Installation
- Switch off the mains/fixed connection cable.
- Make sure to use only the described accessories.
- This product is only suited for wall and ceiling surface mounting.
- Install the product as shown in the figure provided.
- Note the load limit specified.
- Check the secure fixation and proper function of the installed product.
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
Operating Manual PART B
Monopoint for 3-Phase DALI track 1004684 …85
Read manual carefully and keep for further use!
Safety advices for installation and operation. Disregard may lead to danger of
life, burning or fire! Any works on the electrical connection only by
electrician. Do not alter or modify the product. Take out of service when
suspecting a defect or malfunction and contact your dealer or a qualified
electrician. Take measures that children get not harmed by the product.
Additional safety advices =
Use as directed
Monopoint for 3-Phase DALI track. Safety class I ( ) – Connection with
protective conductor. Operate only in dry indoor area. Operate only firmly
fixed on an even surface. Do not strain mechanically or expose to strong dirt
contamination.
Operation
It is the responsibilty of the user to ensure the electrical, mechanical and
thermal compatibility between the monopoint and the luminaires connected to
it.
Care / Storage
Disconnect the complete system from the power supply. Clean external surfaces
regularly with a slightly moistened (water) cloth. Store dry and clean.
Installation
Switch off mains / fixed connection cable! Use only described accessories.
Only suited for wall and ceiling surface mounting. Install as shown in the
figure. Note the load limit. Check secure fixation and proper function!
The user is responsible for ensuring the electrical, mechanical, and thermal compatibility between the monopoint and the luminaires connected to it.
Care / Storage
- Disconnect the complete system from the power supply before performing any maintenance or cleaning.
- Clean the external surfaces regularly with a slightly moistened cloth using water. Do not use any harsh chemicals or abrasive materials.
- Store the product in a dry and clean environment.
FAQ
Q: Can I install this product myself?
A: No, the installation of this product requires expert knowledge and should
only be carried out by an approved electrician while considering local and
national regulations.
Q: What should I do if I suspect a defect or malfunction?
A: If you suspect a defect or malfunction, take the product out of service and
contact your dealer or a qualified electrician for assistance.
Q: Can children be harmed by this product?
A: It is important to take measures to ensure that children do not come into
contact with or get harmed by the product. Keep the product out of their
reach.
© 19.01.2023 SLV GmbH,
Daimlerstr. 21-23, 52531
Übach-Palenberg,
Germany,
Tel. +49 (0)2451 4833-0.
Made in China.