Lights Lotus XX1805 Christmas Light Up Figures Holiday Indoor Instruction Manual
- June 16, 2024
- Lights Lotus
Table of Contents
Lights Lotus XX1805 Christmas Light Up Figures Holiday Indoor
- Position all parts as shown
- Secure each hoof into position on the stand
- To illuminate the lights locate the connector in the head and the body and connect together (diagram A).
- Secure the head into position by inserting the two metal posts into the corresponding metal slots on the neck.
- Slot the antlers into position by inserting the metal posts into the corresponding metal slots.
- If supplied with cable ties, these may be used to further secure body parts to one another once assembled.
- Connect your Reindeer lights together and then connect to the sleigh (diagram A).
- Connect your lights from the back of the Sleigh to the end of the battery box lead wire (diagram A).
- Secure the stand into position using the metal pegs supplied.
- Tie the red bows around the neck.
- To operate the lights locate the battery compartment and insert 3 x D batteries (to do this you’ll need a small crosshead screwdriver.
- To switch on, press the ON/OFF button.
- Press the FUNCTION button to choose your lighting function of choice.
- To activate the timer press the TIMER button once. Your lights will stay illuminated for 6 hours and then automatically turn off for 18 hours. Your lights will continuously repeat this cycle.
- To de-activate the timer, hold down the TIMER button for 3-5 seconds, or until the green light goes off.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>