FIAMMA 02093A76A Carry Bike Caravan Universal Instruction Manual
- June 12, 2024
- FIAMMA
Table of Contents
FIAMMA 02093A76A Carry-Bike Caravan Universal
Product Information: Product Name: CARRY-BIKE CARAVAN UNIVERSAL 02093A76A Weight: 7.5 kg Package Contents: – A, B, C, D, E, F, G, H, I, J, K, L, M, N, O, P, Q, R, S, T, U, V, W, X, Y, Z (multiple quantities) – 2x 6×30 screws – 4x 5,3x10x1 screws – 2x M6x55 screws – 4x M6 screws – 4x M5x60 screws – 4x 5×40 screws – 4x M5 screws – 2x M6 screws – 2x M5 screws – 12x M5 screws Product Usage
Instructions
- Before installation, check that nothing has been damaged or deformed during transport.
- If you have any doubts or questions regarding the installation, use, or limitations of the product, contact the dealer.
- We recommend that the installation is carried out by qualified personnel and in compliance with current local regulations.
- Follow the installation instructions provided on page 5 of the user manual.
- After installation, ensure that no parts are broken or deformed due to transport errors.
- Follow the instructions for use provided on page 9 of the user manual.
- Do not fully tighten the fork to the tube during installation. Leave a 2mm space.
- In case of any problems, contact your local dealer and provide them with the data on the nameplate. You can also consult the website for spare parts drawings.
CARRY-BIKE
Check that nothing has been damaged or deformed during transport.
In the event of doubts or questions concerning the installation, use, or
limitations of the product, contact the dealer. We recommend that the
installation is carried out by qualifi ed personnel and in compliance with
current local regulations.
OVERVIEW
DIMENSIONS
Package contents
Installation instructions
Instructions for use
Safety instructions
Accessories
Warranty
WARNING!
Do not fully tighten the fork to the tube, leave 2mm space.
In case of problems please contact your local dealer indicating the data on the nameplate. Consult our website for spare parts drawing. Read the following instructions and warnings carefully; failure to observe these installation and usage instructions as well as the Highway Code in the relevant country may cause severe harm or damage for which the manufacturer declines all responsibility. Before installation, ensure compatibility with the vehicle on which the product must be installed. Checking that the wall/rear door is sufficiently solid and suitable for guaranteeing the resistance of the anchoring points is always mandatory. If not, strength and compliance with the maximum load indicated in the instructions are not guaranteed and it will be necessary to reinforce these points.
After having positioned the Carry-Bike on the rear axle of the vehicle, the normal weight distribution on both axles would be modifi ed. This variation must not exceed the maximum permissible axle load. Never exceed the maximum permitted length and the total weight of the full-loaded vehicle. Make sure that loading occurs following a correct weight distribution; it must be uniformly distributed (the heaviest bike must be placed near the wall of the vehicle) to ensure better stability. Always give warnings about the presence of the Carry-Bike on your vehicle, use a clear signal for leaning loads and, in case of limited rear visibility, use the additional rear-view mirrors. Take into account the presence of the Carry-Bike, paying attention while driving and especially during reversing maneuvers, particularly if you have a parking assist system.
Always comply with speed limits and the Highway Code. The speed should always be suitable to traffi c conditions and transported load. Check periodically the bicycle rack to make sure it is firmly attached, especially during the fi rst kilometers from the installation and always before and after long trips, to avoid damage to the Carry-Bike/vehicle. Regularly check rubber parts under the upper and/or lower brackets, as well as the belts; if they are porous or worn, replace them immediately.
Warranty Fiamma
In case of defects with regard to materials and manufacturing, the customer is
entitled to the warranty in accordance with local laws and regulations of the
country in which the product was purchased.