Lotus Lights SC-8-10-TT-1 Screw Connectors for LED Strip Lights Instruction Manual
- June 12, 2024
- Lotus Lights
Table of Contents
Installation Instructions for Tape to Tape straight screw connector
Features
– Up to 10A current
– Fits 8 mm and 10 mm wide strips
Specification of 10A straight splice connector (Tape to Tape) 110501010120-1
Specification
Input voltage| IP rating| Rated current| Product
dimension| Under Materials| Working environment| Installation
method
---|---|---|---|---|---|---
12VDC /24VDC| I P20| 10A| 11mrn11.9mm6.6mm| Heat Resistant PC +65% copper|
-10°-45°| Screws
Installation
1. Unscrew the 4 screws of the connector (A)| 2. Insert the end of LED tape light (B) into the connector opening (A). Align the connection points (B1 & B2) to be right under the screws (Al & A2)| 3. Screw down the 2 screws (Al & A2) until firm contact with the LED tape is secured. Do not over tight
4. Insert the other end of the tape light and repeat steps 3 & 4. Make sure polarity of both tapes match on both sides of the connector(+ with + and – with -)
844-245-6887
support@lodlights.com
****WWW.LotusLEDLights.com