Lotus LED Lights SC-8-10-TW Screw Connectors for LED Strip Lights Instruction Manual

June 12, 2024
Lotus LED Lights

Lotus LED Lights SC-8-10-TW Screw Connectors for LED Strip Lights

Picture

Lotus-LED-Lights-SC-8-10-TW-Screw-Connectors-for-LED-Strip-Lights-
fig-1

Features

  • Up to 10A current
  • Fits 8 mm and 10 mm wide strips

Specification

Lotus-LED-Lights-SC-8-10-TW-Screw-Connectors-for-LED-Strip-Lights-
fig-2

Installation

  1. Gently remove the metal cover (C)Lotus-LED-Lights-SC-8-10-TW-Screw-Connectors-for-LED-Strip-Lights-fig-3
  2. Unscrew the 4 screws of the connector (A)
  3. Insert the end of the LED tape light (B) into the connector opening (A) without a middle wall. Tape could be inserted only on this side of the connector. Align the connection points (B1 & B2) to be right under the screws (A1 & A2)
  4. Screw down the 2 screws (A1 & A2) until firm contact with the LED tape is secured. Do not over-tight
  5. Insert the wires into the other side of the connector with copper taps.Lotus-LED-Lights-SC-8-10-TW-Screw-Connectors-for-LED-Strip-Lights-fig-4
  6. Observe the polarity of the tape and wires to the power supply  Screw down the 2 screws (A3 & A4) until firm contact with the wires is secured. Do not over-tight
  7. Mount back the metal cover (C) by pressing down on the connector until it clicks in place.
    Note that the notches are asymmetrical and observe the direction of the cover to match the connector bulges

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals