Lights Lotus SC-8-10-TT-9 Screw Connectors for LED Strip Lights Instruction Manual

June 12, 2024
Lights Lotus

Installation Instructions
for Tape to Tape 90 degree screw connector

SC-8-10-TT-9 Screw Connectors for LED Strip Lights

Picture
Lights Lotus SC 8 10 TT 9 Screw Connectors for LED Strip
Lights Specification of 10A L connector
(Tape to Tape)
110501010119

Features

  • Up to current
  • Fits and wide strips

Specification

Input voltage| IP rating| Rated current| Product dimension| Under Materials| Working environment| Installation method
---|---|---|---|---|---|---
12VDC / 24VDC| I P20| 10A| 15.4mm15.4mm6.6mm| Heat Resistant PC
+65% copper| -10°-45°| Screws

Installation

  1. Unscrew the 4 screws of the connector (A)
  2. Insert the end of LED tape light (B) into the connector opening (A). Align the connection points (B1 & B2) to be right under the screws (Al & A2)
  3. Screw down the 2 screws (Al & A2) until firm contact with the LED tape is secured. Do not over tight
  4. Insert the other end of the tape light and repeat steps 3 & 4. Make sure polarity of both tapes match on both sides of the connector(+ with + and – with -)

Lights Lotus SC 8 10 TT 9 Screw Connectors for LED Strip Lights -
Screws| Lights Lotus
SC 8 10 TT 9 Screw Connectors for LED Strip Lights - LED tape
Light| Lights Lotus SC 8 10 TT 9 Screw Connectors for LED Strip Lights - Unit
firm
---|---|---
Lights Lotus SC 8 10 TT 9 Screw Connectors for LED Strip Lights - repeat
steps

844-245-6887
support@lotusledlights.com
WWW.LotusLEDLights.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Lights Lotus User Manuals

Related Manuals