Lotus LED Lights LBL-KDS Door Sensor User Guide
- June 12, 2024
- Lotus LED Lights
Table of Contents
Lotus LED Lights LBL-KDS Door Sensor
Introduction
This kinetic door sensor could be paired with Lotus doorbell receiver, placed on door or window by 3M sticker or bracket and ring the receiver once the door or window open or close.
Specifications
- Model: LBL-KDS
- Power mode: Kinetic Self-powered
- Working Frequency: 433MHz
- Working Temperature: -15°C~+45°C|+5°F~113 °F
- Operating Range: 100 ft
- Life time: >100,000 times
- Dimensions : 108.2426.8417.19 mm
Installation
- Mount the kinetic door sensor with bracket, which is able to be screwed on the door or use 3M double- sided sticker.
- Long-press the Ringtone selection key for 3 seconds, and release when the indicator light starts blinking. Ringtone Selection Key
- Open/close the door/window quickly, the indicator will go off, and the pairing will be completed.
How to Delete a Pair
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>