SLV 1007473 Worklight Pro 150 Pendant Light Instruction Manual
- June 16, 2024
- SLV
Table of Contents
INSTRUCTION MANUAL PART A
Pendant Light
1007473 Worklight Pro 150 Pendant Light
1007468 …69
…70 1007471
…72 …73
bi 00’9| W3 05l x Et x VZ| 08<1113| M00017| W oocc do
W I 006E umoa| M69| zH09/05-
AOVZ-A003| EL ZL- LLVLOOL
---|---|---|---|---|---|---|---
bi eg| W3 OZ l X Ct X VZ| WI 008Z do
WI 00CE WtA00| MOS| OL 69- 89VLOOL
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
The light source is only exchangeable by a professional. The
separate control unit is only exchangeable by a professional.
Technical Details are subject to change.
****SLV UK
Unit E Chiltern Park
Boscombe Road, Bedfordshire
LU5 4LT
Operating Manual PART B
Pendant Light
1007468 …69 …70 1007471 …72 …73 ml
Read manual carefully and keep for further use!
Safety advices for installation and operation.
Disregard may lead to danger of life, burning or fire!
Any works on the electrical connection only by electrician.
Do not alter or modify the product.
Do not fasten anything on the product.
Do not cover the product.
Take out of service when suspecting a defect or malfunction and contact your
dealer or a qualified electrician.
Take measures that children get not harmed by the product.
Do not stare into the active light source.
Additional safety advices =
Use as directed
- Safety class(1) – Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor area.
- Do not strain mechanically or expose to strong dirt contamination.
- Admissible ambient temperature(ta): -20°C …45°C.
Light Source
The light source of this luminaire may only be replaced by the
manufacturer, an authorized service technician or a comparable qualified
person. 1007468 …69 …70
This product contains a light source of the energy efficiency class E. This
product contains a light source of the energy efficiency class D. 1007471 …72
…73
This product contains light sources of the energy efficiency class D.
Care / Storage
Disconnect product from mains and let it cool down.
Clean external surfaces regularly with a slightly moistened (water) cloth.
Store dry and clean.
Installation
Switch off mains / fixed connection cable!
Use only described accessories.
Use only suitable fastening materials.
Only suited for ceiling surface mounting.
Install as shown in the figure.
Adjust pendant length of the wires with the wire fixer (A). If necessary
shorten the pendant cable: Loosen strain relief (B). Disconnect wires and cut
the pendant cable. Connect as before (attach wire end ferrules if necessary!).
Secure strain relief. The pendant cable may not be strained.
Carry out a continuity test after shortening pendant cable.
Suitable Dimmer: DALI dimmer / light control. Note manufacturer`s
instructions.
Electrical connection
Equip flexible wire ends with suitable wire ferrules!
Live conductor → Terminal L
Neutral conductor → Terminal N
Protective conductor → Earth terminal
Dali control wires → Terminals D- / D+
Connect either Dali control wires to the Dali terminals or establish a Touch
Dim installation. Do not install both.
Touch Dim Operation
Establish installation according to diagram C.
Check secure fixation and proper function!
© 0001 12.05.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany,
Tel. +49 (0)2451 4833-0. Made in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>