SLV 1007233 Luminaire Head Instruction Manual
- June 16, 2024
- SLV
Table of Contents
SLV 1007233 Luminaire Head
- The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
- The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
- Technical Details are subject to change.
Operating Manual PART B
- Luminaire head
- 1007233 …35
Read the manual carefully and keep it for further use!
Safety advice for installation and operation
- Disregarding may lead to danger of life, burning or fire!
- Any work on the electrical connection only by the electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Operate only with intact protection glass.
- The supply cord may not be covered with soil.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children are not harmed by the product.
- Do not stare into the active light source.
Additional safety advice =
Use as directed
This product must only be used in connection with a light bollard with one of
the following product numbers:1006379, 1006380, 1006381.
Safety class I
- Connection with protective conductor.
- Do not strain mechanically or expose to strong dirt contamination.
- IP65: Protection against dust (dust-tight) – Protection against jetted water from all directions.
- Admissible ambient temperature(ta): -20°C …+35°C.
Light Source
- The light source of this luminaire may only be replaced by the manufacturer, an authorized service technician or a comparable qualified person.
- This product contains a light source of the energy efficiency class C.
Care / Storage
- Disconnect the product from the mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Do not clean with a pressure washer.
- The base may not be covered (e.g. with foliage, soil, etc.)
- Openings providing aeration or drainage must be kept free.
- The following influences may have unwanted effects on the product: acidic surroundings, high salt content in the air, cleaning agents, fertilizer, thawing salt, and chemicals.
- Store dry and clean.
Installation
- Follow local regulations for outdoor installations.
- Do not seal the product yourself (e.g. with silicone).
- Install according to the declared IP type.
- Install as shown in the figure.
- Suitable Dimmer: DALI dimmer / light control.
Note the manufacturer`s instructions.
Electrical connection
- Protect the connection by applying an IP 68 connection box or cable connector (e.g. SLV 228725, 1006453).
- Suitable terminal block: 250V, 16A, Pole: 5
- Live conductor Conductor L
- Neutral conductor Conductor N
- Protective conductor Conductor (PE)
- Dali control wires DA+, DAA maximum of 20 luminaires may be connected.
- Check secure fixation and proper function!
0001 21.06.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>