SLV 1007672 One Cube Up Down LED Instruction Manual
- June 16, 2024
- SLV
Table of Contents
SLV 1007672 One Cube Up Down LED
- The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
- The light source is only exchangeable by a professional. The separate control unit is only exchangeable by a professional.
- Technical Details are subject to change
Operating Manual PART B
Tools Required
Pendant Light
- Read the manual carefully and keep it for further use!
- Safety advise for installation and operation.
- Disregarding may lead to danger of life, burning or fire!
- Any work on the electrical connection only by the electrician.
- Do not alter or modify the product.
- Do not fasten anything on the product.
- Do not cover the product.
- Take out of service when suspecting a defect or malfunction and contact your dealer or a qualified electrician.
- Take measures that children are not harmed by the product.
- Do not stare into the active light source.
- Additional safety bits of advice =
Use as directed
- Safety class I (1) Connection with protective conductor.
- Operate only firmly fixed on an even surface.
- Operate only on normal or not inflammable surfaces.
- Operate only in dry indoor areas.
- Do not strain mechanically or expose to strong dirt contamination.
- Admissible ambient temperature(ta): -20°C …35°C.
Light Source
The light source of this luminaire may only be replaced by the manufacturer,
an authorized service technician or a comparable qualified person. This
product contains light sources of the energy efficiency class E.
Care / Storage
- Disconnect the product from the mains and let it cool down.
- Clean external surfaces regularly with a slightly moistened (water) cloth.
- Store dry and clean.
Installation
- Switch off mains / fixed connection cable!
- Use only described accessories.
- Use only suitable fastening materials.
- Only suited for ceiling surface mounting.
- Install as shown in the figure.
- Adjust the pendant length of the wires with the wire fixer.
- Adapting the pendant cable: Loosen strain relief (A).
- Push the pendant cable into the canopy.
- Secure the strain relief. The pendant cable may not be strained.
- Suitable Dimmer: DALI dimmer / light control. Note the manufacturer`s instructions.
Electrical connection
- Equip flexible wire ends with suitable wire ferrules!
- Live conductor
- Terminal L
- Neutral conductor
- Terminal N
- Protective conductor
- Earth terminal
- Dali control wires
- Terminals DA
- Check secure fixation and proper function!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>