SLV PHELIA 146010 Floor Lamp Instruction Manual
- June 16, 2024
- SLV
Table of Contents
SLV PHELIA 146010 Floor Lamp
FEATURES
The installation requires expert knowledge and may be carried out only by an approved electrician under consideration of local and national regulations!
INSTALLATION INSTRUCTION
Operating Manual PART B
Floor Stand Luminaire 146010
Read the manual carefully and keep it for further use! Safety pieces of
advice for installation and operation. Disregarding may lead to danger of
life, burning or fire! Do not alter or modify the product. Do not fasten
anything on the product. Do not cover the product. Take out of service when
suspecting a defect or malfunction and contact your dealer or a qualified
electrician. Take measures that children get not harmed by the product. If the
external flexible cable or cord of this luminaire is damaged, it shall be
exclusively replaced by the manufacturer or a qualified electrician to avoid
hazards.
Additional safety advice =
Use as directed
Safety class I – Connection with protective conductor. Operate only on an even, stable and tilt-fixed surface. Operate only in dry indoor areas. Do not strain mechanically or expose to strong dirt contamination. A minimum distance of the light source to the illuminated surface: 0,2 m.
Lamp replacement
Disconnect the luminaire from the mains and let it cool down. Suitable light sources: E27, 23W max.
Care / Storage
Disconnect the product from the mains and let it cool down. Clean external surfaces regularly with a slightly moistened (water) cloth. Store dry and clean.
Placement
Place in a way that the product poses no danger(e.g. stumbling). Note the
distance to the illuminated surface.
Putting into service
Insert light source. Connect the mains plug with the mains plug socket. Switch
on and off using the switch. Check for secure standing and proper function!
- © 21.02.2023 SLV GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49 (0)2451 4833-0. Made in China.